[GIT,PULL] remoteproc updates for v6.2

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git tags/rproc-v6.2

Message

Bjorn Andersson Dec. 20, 2022, 6:08 p.m. UTC

Hi Linus,

There's a trivial merge conflict between this pull and the SPI tree.
Courtesy of Stephen Rothwell, here's the expected resolution:

> diff --cc include/linux/firmware/xlnx-zynqmp.h
> index fac37680ffe7,cf92e739fa3b..000000000000
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@@ -135,7 -138,10 +138,11 @@@ enum pm_ret_status
>   };
>
>   enum pm_ioctl_id {
> +       IOCTL_GET_RPU_OPER_MODE = 0,
> +       IOCTL_SET_RPU_OPER_MODE = 1,
> +       IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
> +       IOCTL_TCM_COMB_CONFIG = 3,
>  +      IOCTL_SET_TAPDELAY_BYPASS = 4,
>         IOCTL_SD_DLL_RESET = 6,
>         IOCTL_SET_SD_TAPDELAY = 7,
>         IOCTL_SET_PLL_FRAC_MODE = 8,

Regards,
Bjorn

The following changes since commit 247f34f7b80357943234f93f247a1ae6b6c3a740:

  Linux 6.1-rc2 (2022-10-23 15:27:33 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git tags/rproc-v6.2

for you to fetch changes up to 11c7f9e3131ad14b27a957496088fa488b153a48:

  remoteproc: core: Do pm_relax when in RPROC_OFFLINE state (2022-12-07 11:20:55 -0700)

----------------------------------------------------------------
remoteproc updates for v6.2

rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.

The imx_rproc driver is extended with support for communicating with and
attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.

The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.

Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.

Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled.

----------------------------------------------------------------
Ben Levinsky (3):
      firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
      firmware: xilinx: Add shutdown/wakeup APIs
      firmware: xilinx: Add RPU configuration APIs

Gaosheng Cui (1):
      remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()

Jeff Johnson (1):
      remoteproc: sysmon: Make QMI message rules const

Luca Weiss (2):
      remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
      remoteproc: qcom_q6v5_pas: detach power domains on remove

Maria Yu (1):
      remoteproc: core: Do pm_relax when in RPROC_OFFLINE state

Peng Fan (8):
      dt-bindings: remoteproc: imx_rproc: Support i.MX8QXP
      dt-bindings: remoteproc: imx_rproc: Support i.MX8QM
      remoteproc: imx_rproc: Support attaching to i.MX8QXP M4
      remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
      remoteproc: imx_rproc: Support i.MX8QM
      remoteproc: imx_rproc: Request mbox channel later
      remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
      remoteproc: imx_rproc: Correct i.MX93 DRAM mapping

Shang XiaoJing (2):
      remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
      remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()

Shengjiu Wang (2):
      remoteproc: core: Auto select rproc-virtio device id
      remoteproc: imx_dsp_rproc: Add mutex protection for workqueue

Tanmay Shah (3):
      dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
      arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
      drivers: remoteproc: Add Xilinx r5 remoteproc driver

Yuan Can (1):
      remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()

ye xingchen (1):
      remoteproc: core: Use device_match_of_node()

 .../bindings/remoteproc/fsl,imx-rproc.yaml         |   16 +
 .../bindings/remoteproc/xlnx,zynqmp-r5fss.yaml     |  135 +++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |   33 +
 drivers/firmware/xilinx/zynqmp.c                   |   97 ++
 drivers/remoteproc/Kconfig                         |   13 +
 drivers/remoteproc/Makefile                        |    1 +
 drivers/remoteproc/imx_dsp_rproc.c                 |   12 +-
 drivers/remoteproc/imx_rproc.c                     |  298 +++++-
 drivers/remoteproc/qcom_q6v5_pas.c                 |    4 +
 drivers/remoteproc/qcom_q6v5_wcss.c                |    6 +-
 drivers/remoteproc/qcom_sysmon.c                   |   13 +-
 drivers/remoteproc/remoteproc_core.c               |   19 +-
 drivers/remoteproc/xlnx_r5_remoteproc.c            | 1067 ++++++++++++++++++++
 include/dt-bindings/power/xlnx-zynqmp-power.h      |    6 +
 include/linux/firmware/xlnx-zynqmp.h               |   60 ++
 15 files changed, 1760 insertions(+), 20 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
 create mode 100644 drivers/remoteproc/xlnx_r5_remoteproc.c

Comments

[e-mail] Dec. 21, 2022, 5:44 p.m. UTC | #1

The pull request you sent on Tue, 20 Dec 2022 12:08:32 -0600:

> https://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux.git tags/rproc-v6.2

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/9cf5b508bd260d5693d337bcf1f9b82b961b6137

Thank you!