@@ -74,9 +74,11 @@ struct k3_r5_mem {
* Split mode : AM65x, J721E, J7200 and AM64x SoCs
* LockStep mode : AM65x, J721E and J7200 SoCs
* Single-CPU mode : AM64x SoCs only
+ * None : AM62x, AM62A SoCs
*/
enum cluster_mode {
- CLUSTER_MODE_SPLIT = 0,
+ CLUSTER_MODE_NONE = -1,
+ CLUSTER_MODE_SPLIT,
CLUSTER_MODE_LOCKSTEP,
CLUSTER_MODE_SINGLECPU,
};
@@ -86,11 +88,13 @@ enum cluster_mode {
* @tcm_is_double: flag to denote the larger unified TCMs in certain modes
* @tcm_ecc_autoinit: flag to denote the auto-initialization of TCMs for ECC
* @single_cpu_mode: flag to denote if SoC/IP supports Single-CPU mode
+ * @is_single_core: flag to denote if SoC/IP has only single core R5
*/
struct k3_r5_soc_data {
bool tcm_is_double;
bool tcm_ecc_autoinit;
bool single_cpu_mode;
+ bool is_single_core;
};
/**
@@ -838,7 +842,8 @@ static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem);
if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
- cluster->mode == CLUSTER_MODE_SINGLECPU) {
+ cluster->mode == CLUSTER_MODE_SINGLECPU ||
+ cluster->mode == CLUSTER_MODE_NONE) {
core = core0;
} else {
core = kproc->core;
@@ -853,7 +858,7 @@ static int k3_r5_rproc_configure(struct k3_r5_rproc *kproc)
boot_vec, cfg, ctrl, stat);
/* check if only Single-CPU mode is supported on applicable SoCs */
- if (cluster->soc_data->single_cpu_mode) {
+ if (cluster->soc_data->single_cpu_mode || cluster->soc_data->is_single_core) {
single_cpu =
!!(stat & PROC_BOOT_STATUS_FLAG_R5_SINGLECORE_ONLY);
if (single_cpu && cluster->mode == CLUSTER_MODE_SPLIT) {
@@ -1074,6 +1079,7 @@ static void k3_r5_adjust_tcm_sizes(struct k3_r5_rproc *kproc)
if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
cluster->mode == CLUSTER_MODE_SINGLECPU ||
+ cluster->mode == CLUSTER_MODE_NONE ||
!cluster->soc_data->tcm_is_double)
return;
@@ -1147,7 +1153,9 @@ static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc)
atcm_enable = cfg & PROC_BOOT_CFG_FLAG_R5_ATCM_EN ? 1 : 0;
btcm_enable = cfg & PROC_BOOT_CFG_FLAG_R5_BTCM_EN ? 1 : 0;
loczrama = cfg & PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE ? 1 : 0;
- if (cluster->soc_data->single_cpu_mode) {
+ if (cluster->soc_data->is_single_core) {
+ mode = CLUSTER_MODE_NONE;
+ } else if (cluster->soc_data->single_cpu_mode) {
mode = cfg & PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE ?
CLUSTER_MODE_SINGLECPU : CLUSTER_MODE_SPLIT;
} else {
@@ -1271,7 +1279,8 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev)
/* create only one rproc in lockstep mode or single-cpu mode */
if (cluster->mode == CLUSTER_MODE_LOCKSTEP ||
- cluster->mode == CLUSTER_MODE_SINGLECPU)
+ cluster->mode == CLUSTER_MODE_SINGLECPU ||
+ cluster->mode == CLUSTER_MODE_NONE)
break;
}
@@ -1704,21 +1713,32 @@ static int k3_r5_probe(struct platform_device *pdev)
* default to most common efuse configurations - Split-mode on AM64x
* and LockStep-mode on all others
*/
- cluster->mode = data->single_cpu_mode ?
+ if (!data->is_single_core)
+ cluster->mode = data->single_cpu_mode ?
CLUSTER_MODE_SPLIT : CLUSTER_MODE_LOCKSTEP;
+ else
+ cluster->mode = CLUSTER_MODE_NONE;
+
cluster->soc_data = data;
INIT_LIST_HEAD(&cluster->cores);
- ret = of_property_read_u32(np, "ti,cluster-mode", &cluster->mode);
- if (ret < 0 && ret != -EINVAL) {
- dev_err(dev, "invalid format for ti,cluster-mode, ret = %d\n",
- ret);
- return ret;
+ if (!data->is_single_core) {
+ ret = of_property_read_s32(np, "ti,cluster-mode", &cluster->mode);
+ if (ret < 0 && ret != -EINVAL) {
+ dev_err(dev, "invalid format for ti,cluster-mode, ret = %d\n", ret);
+ return ret;
+ }
}
num_cores = of_get_available_child_count(np);
- if (num_cores != 2) {
- dev_err(dev, "MCU cluster requires both R5F cores to be enabled, num_cores = %d\n",
+ if (num_cores != 2 && !data->is_single_core) {
+ dev_err(dev, "MCU cluster requires both R5F cores to be enabled but num_cores is set to = %d\n",
+ num_cores);
+ return -ENODEV;
+ }
+
+ if (num_cores != 1 && data->is_single_core) {
+ dev_err(dev, "SoC supports only single core R5 but num_cores is set to %d\n",
num_cores);
return -ENODEV;
}
@@ -1760,18 +1780,28 @@ static const struct k3_r5_soc_data am65_j721e_soc_data = {
.tcm_is_double = false,
.tcm_ecc_autoinit = false,
.single_cpu_mode = false,
+ .is_single_core = false,
};
static const struct k3_r5_soc_data j7200_j721s2_soc_data = {
.tcm_is_double = true,
.tcm_ecc_autoinit = true,
.single_cpu_mode = false,
+ .is_single_core = false,
};
static const struct k3_r5_soc_data am64_soc_data = {
.tcm_is_double = true,
.tcm_ecc_autoinit = true,
.single_cpu_mode = true,
+ .is_single_core = false,
+};
+
+static const struct k3_r5_soc_data am62_soc_data = {
+ .tcm_is_double = false,
+ .tcm_ecc_autoinit = true,
+ .single_cpu_mode = false,
+ .is_single_core = true,
};
static const struct of_device_id k3_r5_of_match[] = {
@@ -1779,6 +1809,7 @@ static const struct of_device_id k3_r5_of_match[] = {
{ .compatible = "ti,j721e-r5fss", .data = &am65_j721e_soc_data, },
{ .compatible = "ti,j7200-r5fss", .data = &j7200_j721s2_soc_data, },
{ .compatible = "ti,am64-r5fss", .data = &am64_soc_data, },
+ { .compatible = "ti,am62-r5fss", .data = &am62_soc_data, },
{ .compatible = "ti,j721s2-r5fss", .data = &j7200_j721s2_soc_data, },
{ /* sentinel */ },
};
AM62 and AM62A SoCs use single core R5F which is a new scenario different than the one being used with CLUSTER_MODE_SINGLECPU which is for utilizing a single core from a set of cores available in R5F cluster present in the SoC. To support this single core scenario map it with newly defined CLUSTER_MODE_NONE and use it when compatible is set to ti,am62-r5fss. Signed-off-by: Devarsh Thakkar <devarsht@ti.com> --- V2: Fix indentation and ordering issues as per review comments V3: Change CLUSTER_MODE_NONE value to -1 --- drivers/remoteproc/ti_k3_r5_remoteproc.c | 57 ++++++++++++++++++------ 1 file changed, 44 insertions(+), 13 deletions(-)