| Message ID | 20230213211825.3507034-4-tanmay.shah@amd.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | drivers: remoteproc: xilinx: add mailbox support | expand |
On Mon, Feb 13, 2023 at 01:18:26PM -0800, Tanmay Shah wrote: > This patch makes each r5 core mailbox client and uses > tx and rx channels to send and receive data to/from > remote processor respectively. This is needed for rpmsg > communication to remote processor. > > Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> > --- > > Changes in v3: > - fix multi-line comment format > - do not mixup mailbox information with memory-regions > - fix redundant dev_warn for split mode > - setting up mailboxes should return an error code > - redesign driver to move mailbox setup during driver probe > - add .kick function only if mailbox setup is success > > v2: https://lore.kernel.org/all/20230126213154.1707300-1-tanmay.shah@amd.com/ > > drivers/remoteproc/xlnx_r5_remoteproc.c | 228 +++++++++++++++++++++++- > 1 file changed, 226 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c > index 81af2dea56c2..f7131fe8fe7e 100644 > --- a/drivers/remoteproc/xlnx_r5_remoteproc.c > +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c > @@ -8,16 +8,23 @@ > #include <linux/dma-mapping.h> > #include <linux/firmware/xlnx-zynqmp.h> > #include <linux/kernel.h> > +#include <linux/mailbox_client.h> > +#include <linux/mailbox/zynqmp-ipi-message.h> > #include <linux/module.h> > #include <linux/of_address.h> > #include <linux/of_platform.h> > #include <linux/of_reserved_mem.h> > #include <linux/platform_device.h> > #include <linux/remoteproc.h> > -#include <linux/slab.h> > > #include "remoteproc_internal.h" > > +/* IPI buffer MAX length */ > +#define IPI_BUF_LEN_MAX 32U > + > +/* RX mailbox client buffer max length */ > +#define MBOX_CLIENT_BUF_MAX (IPI_BUF_LEN_MAX + \ > + sizeof(struct zynqmp_ipi_message)) > /* > * settings for RPU cluster mode which > * reflects possible values of xlnx,cluster-mode dt-property > @@ -43,6 +50,27 @@ struct mem_bank_data { > char *bank_name; > }; > > +/** > + * struct mbox_info > + * > + * @rx_mc_buf: to copy data from mailbox rx channel > + * @tx_mc_buf: to copy data to mailbox tx channel > + * @r5_core: this mailbox's corresponding r5_core pointer > + * @mbox_work: schedule work after receiving data from mailbox > + * @mbox_cl: mailbox client > + * @tx_chan: mailbox tx channel > + * @rx_chan: mailbox rx channel > + */ > +struct mbox_info { > + unsigned char rx_mc_buf[MBOX_CLIENT_BUF_MAX]; > + unsigned char tx_mc_buf[MBOX_CLIENT_BUF_MAX]; > + struct zynqmp_r5_core *r5_core; > + struct work_struct mbox_work; > + struct mbox_client mbox_cl; > + struct mbox_chan *tx_chan; > + struct mbox_chan *rx_chan; > +}; > + > /* > * Hardcoded TCM bank values. This will be removed once TCM bindings are > * accepted for system-dt specifications and upstreamed in linux kernel > @@ -63,6 +91,7 @@ static const struct mem_bank_data zynqmp_tcm_banks[] = { > * @tcm_banks: array of each TCM bank data > * @rproc: rproc handle > * @pm_domain_id: RPU CPU power domain id > + * @ipi: pointer to mailbox information > */ > struct zynqmp_r5_core { > struct device *dev; > @@ -71,6 +100,7 @@ struct zynqmp_r5_core { > struct mem_bank_data **tcm_banks; > struct rproc *rproc; > u32 pm_domain_id; > + struct mbox_info *ipi; > }; > > /** > @@ -88,6 +118,178 @@ struct zynqmp_r5_cluster { > struct zynqmp_r5_core **r5_cores; > }; > > +/** > + * event_notified_idr_cb() - callback for vq_interrupt per notifyid > + * @id: rproc->notify id > + * @ptr: pointer to idr private data > + * @data: data passed to idr_for_each callback > + * > + * Pass notification to remoteproc virtio > + * > + * Return: 0. having return is to satisfy the idr_for_each() function > + * pointer input argument requirement. > + **/ > +static int event_notified_idr_cb(int id, void *ptr, void *data) > +{ > + struct rproc *rproc = data; > + > + if (rproc_vq_interrupt(rproc, id) == IRQ_NONE) > + dev_dbg(&rproc->dev, "data not found for vqid=%d\n", id); > + > + return 0; > +} > + > +/** > + * handle_event_notified() - remoteproc notification work function > + * @work: pointer to the work structure > + * > + * It checks each registered remoteproc notify IDs. > + */ > +static void handle_event_notified(struct work_struct *work) > +{ > + struct mbox_info *ipi; > + struct rproc *rproc; > + > + ipi = container_of(work, struct mbox_info, mbox_work); > + rproc = ipi->r5_core->rproc; > + > + /* > + * We only use IPI for interrupt. The RPU firmware side may or may > + * not write the notifyid when it trigger IPI. > + * And thus, we scan through all the registered notifyids and > + * find which one is valid to get the message. > + * Even if message from firmware is NULL, we attempt to get vqid > + */ > + idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc); > +} > + > +/** > + * zynqmp_r5_mb_rx_cb() - receive channel mailbox callback > + * @cl: mailbox client > + * @msg: message pointer > + * > + * Receive data from ipi buffer, ack interrupt and then > + * it will schedule the R5 notification work. > + */ > +static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg) > +{ > + struct zynqmp_ipi_message *ipi_msg, *buf_msg; > + struct mbox_info *ipi; > + size_t len; > + > + ipi = container_of(cl, struct mbox_info, mbox_cl); > + > + /* copy data from ipi buffer to r5_core */ > + ipi_msg = (struct zynqmp_ipi_message *)msg; > + buf_msg = (struct zynqmp_ipi_message *)ipi->rx_mc_buf; > + len = ipi_msg->len; > + if (len > IPI_BUF_LEN_MAX) { > + dev_warn(cl->dev, "msg size exceeded than %d\n", > + IPI_BUF_LEN_MAX); > + len = IPI_BUF_LEN_MAX; > + } > + buf_msg->len = len; > + memcpy(buf_msg->data, ipi_msg->data, len); > + > + /* received and processed interrupt ack */ > + if (mbox_send_message(ipi->rx_chan, NULL) < 0) > + dev_err(cl->dev, "ack failed to mbox rx_chan\n"); > + > + schedule_work(&ipi->mbox_work); > +} > + > +/** > + * zynqmp_r5_setup_mbox() - Setup mailboxes related properties > + * this is used for each individual R5 core > + * > + * @cdev: child node device > + * > + * Function to setup mailboxes related properties > + * return : NULL if failed else pointer to mbox_info > + */ > +static struct mbox_info *zynqmp_r5_setup_mbox(struct device *cdev) > +{ > + struct mbox_client *mbox_cl; > + struct mbox_info *ipi; > + > + ipi = kzalloc(sizeof(*ipi), GFP_KERNEL); > + if (!ipi) > + return NULL; > + > + mbox_cl = &ipi->mbox_cl; > + mbox_cl->rx_callback = zynqmp_r5_mb_rx_cb; > + mbox_cl->tx_block = false; > + mbox_cl->knows_txdone = false; > + mbox_cl->tx_done = NULL; > + mbox_cl->dev = cdev; > + > + /* Request TX and RX channels */ > + ipi->tx_chan = mbox_request_channel_byname(mbox_cl, "tx"); > + if (IS_ERR(ipi->tx_chan)) { > + ipi->tx_chan = NULL; > + kfree(ipi); > + dev_warn(cdev, "mbox tx channel request failed\n"); > + return NULL; > + } > + > + ipi->rx_chan = mbox_request_channel_byname(mbox_cl, "rx"); > + if (IS_ERR(ipi->rx_chan)) { > + mbox_free_channel(ipi->tx_chan); > + ipi->rx_chan = NULL; > + ipi->tx_chan = NULL; > + kfree(ipi); > + dev_warn(cdev, "mbox rx channel request failed\n"); > + return NULL; > + } > + > + INIT_WORK(&ipi->mbox_work, handle_event_notified); > + > + return ipi; > +} > + > +static void zynqmp_r5_free_mbox(struct mbox_info *ipi) > +{ > + if (!ipi) > + return; > + > + if (ipi->tx_chan) { > + mbox_free_channel(ipi->tx_chan); > + ipi->tx_chan = NULL; > + } > + > + if (ipi->rx_chan) { > + mbox_free_channel(ipi->rx_chan); > + ipi->rx_chan = NULL; > + } > + > + kfree(ipi); > +} > + > +/* > + * zynqmp_r5_core_kick() - kick a firmware if mbox is provided > + * @rproc: r5 core's corresponding rproc structure > + * @vqid: virtqueue ID > + */ > +static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid) > +{ > + struct zynqmp_r5_core *r5_core = rproc->priv; > + struct device *dev = r5_core->dev; > + struct zynqmp_ipi_message *mb_msg; > + struct mbox_info *ipi; > + int ret; > + > + ipi = r5_core->ipi; > + if (!ipi) > + return; > + > + mb_msg = (struct zynqmp_ipi_message *)ipi->tx_mc_buf; > + memcpy(mb_msg->data, &vqid, sizeof(vqid)); > + mb_msg->len = sizeof(vqid); > + ret = mbox_send_message(ipi->tx_chan, mb_msg); > + if (ret < 0) > + dev_warn(dev, "failed to send message\n"); > +} > + > /* > * zynqmp_r5_set_mode() > * > @@ -617,7 +819,7 @@ static int zynqmp_r5_rproc_unprepare(struct rproc *rproc) > return 0; > } > > -static const struct rproc_ops zynqmp_r5_rproc_ops = { > +static struct rproc_ops zynqmp_r5_rproc_ops = { > .prepare = zynqmp_r5_rproc_prepare, > .unprepare = zynqmp_r5_rproc_unprepare, > .start = zynqmp_r5_rproc_start, > @@ -642,6 +844,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > { > struct zynqmp_r5_core *r5_core; > struct rproc *r5_rproc; > + struct mbox_info *ipi; > int ret; > > /* Set up DMA mask */ > @@ -649,12 +852,23 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > if (ret) > return ERR_PTR(ret); > > + /* > + * If mailbox nodes are disabled using "status" property then setting up > + * mailbox channels will be failed. In that case we don't really need > + * kick() operation. Include .kick() only if mbox channels are acquired > + * successfully. > + */ > + ipi = zynqmp_r5_setup_mbox(cdev); > + if (ipi) > + zynqmp_r5_rproc_ops.kick = zynqmp_r5_rproc_kick; > + > /* Allocate remoteproc instance */ > r5_rproc = rproc_alloc(cdev, dev_name(cdev), > &zynqmp_r5_rproc_ops, > NULL, sizeof(struct zynqmp_r5_core)); > if (!r5_rproc) { > dev_err(cdev, "failed to allocate memory for rproc instance\n"); > + zynqmp_r5_free_mbox(ipi); > return ERR_PTR(-ENOMEM); > } > > @@ -665,6 +879,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > if (!r5_core->np) { > dev_err(cdev, "can't get device node for r5 core\n"); > ret = -EINVAL; > + zynqmp_r5_free_mbox(ipi); > goto free_rproc; > } > > @@ -672,10 +887,17 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) > ret = rproc_add(r5_rproc); > if (ret) { > dev_err(cdev, "failed to add r5 remoteproc\n"); > + zynqmp_r5_free_mbox(ipi); > goto free_rproc; > } > > + if (ipi) { > + r5_core->ipi = ipi; > + ipi->r5_core = r5_core; > + } > + > r5_core->rproc = r5_rproc; > + > return r5_core; > > free_rproc: > @@ -918,6 +1140,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) > while (i >= 0) { > put_device(child_devs[i]); > if (r5_cores[i]) { > + zynqmp_r5_free_mbox(r5_cores[i]->ipi); The mailboxes are initialized in zynqmp_r5_add_rproc_core() but free'd here in case of trouble, which introduces coupling between the two functions. I suggest moving zynqmp_r5_setup_mbox() in zynqmp_r5_cluster_init() and initialize both mailboxes in it. I am done reviewing this set. Thanks, Mathieu Thanks, Mathieu > of_reserved_mem_device_release(r5_cores[i]->dev); > rproc_del(r5_cores[i]->rproc); > rproc_free(r5_cores[i]->rproc); > @@ -942,6 +1165,7 @@ static void zynqmp_r5_cluster_exit(void *data) > > for (i = 0; i < cluster->core_count; i++) { > r5_core = cluster->r5_cores[i]; > + zynqmp_r5_free_mbox(r5_core->ipi); > of_reserved_mem_device_release(r5_core->dev); > put_device(r5_core->dev); > rproc_del(r5_core->rproc); > -- > 2.25.1 >
On 2/22/23 11:06 AM, Mathieu Poirier wrote: > On Mon, Feb 13, 2023 at 01:18:26PM -0800, Tanmay Shah wrote: >> [ ... ] >> + >> /* >> * zynqmp_r5_set_mode() >> * >> @@ -617,7 +819,7 @@ static int zynqmp_r5_rproc_unprepare(struct rproc *rproc) >> return 0; >> } >> >> -static const struct rproc_ops zynqmp_r5_rproc_ops = { >> +static struct rproc_ops zynqmp_r5_rproc_ops = { >> .prepare = zynqmp_r5_rproc_prepare, >> .unprepare = zynqmp_r5_rproc_unprepare, >> .start = zynqmp_r5_rproc_start, >> @@ -642,6 +844,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) >> { >> struct zynqmp_r5_core *r5_core; >> struct rproc *r5_rproc; >> + struct mbox_info *ipi; >> int ret; >> >> /* Set up DMA mask */ >> @@ -649,12 +852,23 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) >> if (ret) >> return ERR_PTR(ret); >> >> + /* >> + * If mailbox nodes are disabled using "status" property then setting up >> + * mailbox channels will be failed. In that case we don't really need >> + * kick() operation. Include .kick() only if mbox channels are acquired >> + * successfully. >> + */ >> + ipi = zynqmp_r5_setup_mbox(cdev); >> + if (ipi) >> + zynqmp_r5_rproc_ops.kick = zynqmp_r5_rproc_kick; >> + >> /* Allocate remoteproc instance */ >> r5_rproc = rproc_alloc(cdev, dev_name(cdev), >> &zynqmp_r5_rproc_ops, >> NULL, sizeof(struct zynqmp_r5_core)); >> if (!r5_rproc) { >> dev_err(cdev, "failed to allocate memory for rproc instance\n"); >> + zynqmp_r5_free_mbox(ipi); >> return ERR_PTR(-ENOMEM); >> } >> >> @@ -665,6 +879,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) >> if (!r5_core->np) { >> dev_err(cdev, "can't get device node for r5 core\n"); >> ret = -EINVAL; >> + zynqmp_r5_free_mbox(ipi); >> goto free_rproc; >> } >> >> @@ -672,10 +887,17 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) >> ret = rproc_add(r5_rproc); >> if (ret) { >> dev_err(cdev, "failed to add r5 remoteproc\n"); >> + zynqmp_r5_free_mbox(ipi); >> goto free_rproc; >> } >> >> + if (ipi) { >> + r5_core->ipi = ipi; >> + ipi->r5_core = r5_core; >> + } >> + >> r5_core->rproc = r5_rproc; >> + >> return r5_core; >> >> free_rproc: >> @@ -918,6 +1140,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) >> while (i >= 0) { >> put_device(child_devs[i]); >> if (r5_cores[i]) { >> + zynqmp_r5_free_mbox(r5_cores[i]->ipi); > The mailboxes are initialized in zynqmp_r5_add_rproc_core() but free'd here in > case of trouble, which introduces coupling between the two functions. I suggest > moving zynqmp_r5_setup_mbox() in zynqmp_r5_cluster_init() and initialize both > mailboxes in it. > > I am done reviewing this set. Ack. Yes that makes sense. Thanks, Tanmay > > Thanks, > Mathieu > > Thanks, > Mathieu > >> of_reserved_mem_device_release(r5_cores[i]->dev); >> rproc_del(r5_cores[i]->rproc); >> rproc_free(r5_cores[i]->rproc); >> @@ -942,6 +1165,7 @@ static void zynqmp_r5_cluster_exit(void *data) >> >> for (i = 0; i < cluster->core_count; i++) { >> r5_core = cluster->r5_cores[i]; >> + zynqmp_r5_free_mbox(r5_core->ipi); >> of_reserved_mem_device_release(r5_core->dev); >> put_device(r5_core->dev); >> rproc_del(r5_core->rproc); >> -- >> 2.25.1 >>
diff --git a/drivers/remoteproc/xlnx_r5_remoteproc.c b/drivers/remoteproc/xlnx_r5_remoteproc.c index 81af2dea56c2..f7131fe8fe7e 100644 --- a/drivers/remoteproc/xlnx_r5_remoteproc.c +++ b/drivers/remoteproc/xlnx_r5_remoteproc.c @@ -8,16 +8,23 @@ #include <linux/dma-mapping.h> #include <linux/firmware/xlnx-zynqmp.h> #include <linux/kernel.h> +#include <linux/mailbox_client.h> +#include <linux/mailbox/zynqmp-ipi-message.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/of_reserved_mem.h> #include <linux/platform_device.h> #include <linux/remoteproc.h> -#include <linux/slab.h> #include "remoteproc_internal.h" +/* IPI buffer MAX length */ +#define IPI_BUF_LEN_MAX 32U + +/* RX mailbox client buffer max length */ +#define MBOX_CLIENT_BUF_MAX (IPI_BUF_LEN_MAX + \ + sizeof(struct zynqmp_ipi_message)) /* * settings for RPU cluster mode which * reflects possible values of xlnx,cluster-mode dt-property @@ -43,6 +50,27 @@ struct mem_bank_data { char *bank_name; }; +/** + * struct mbox_info + * + * @rx_mc_buf: to copy data from mailbox rx channel + * @tx_mc_buf: to copy data to mailbox tx channel + * @r5_core: this mailbox's corresponding r5_core pointer + * @mbox_work: schedule work after receiving data from mailbox + * @mbox_cl: mailbox client + * @tx_chan: mailbox tx channel + * @rx_chan: mailbox rx channel + */ +struct mbox_info { + unsigned char rx_mc_buf[MBOX_CLIENT_BUF_MAX]; + unsigned char tx_mc_buf[MBOX_CLIENT_BUF_MAX]; + struct zynqmp_r5_core *r5_core; + struct work_struct mbox_work; + struct mbox_client mbox_cl; + struct mbox_chan *tx_chan; + struct mbox_chan *rx_chan; +}; + /* * Hardcoded TCM bank values. This will be removed once TCM bindings are * accepted for system-dt specifications and upstreamed in linux kernel @@ -63,6 +91,7 @@ static const struct mem_bank_data zynqmp_tcm_banks[] = { * @tcm_banks: array of each TCM bank data * @rproc: rproc handle * @pm_domain_id: RPU CPU power domain id + * @ipi: pointer to mailbox information */ struct zynqmp_r5_core { struct device *dev; @@ -71,6 +100,7 @@ struct zynqmp_r5_core { struct mem_bank_data **tcm_banks; struct rproc *rproc; u32 pm_domain_id; + struct mbox_info *ipi; }; /** @@ -88,6 +118,178 @@ struct zynqmp_r5_cluster { struct zynqmp_r5_core **r5_cores; }; +/** + * event_notified_idr_cb() - callback for vq_interrupt per notifyid + * @id: rproc->notify id + * @ptr: pointer to idr private data + * @data: data passed to idr_for_each callback + * + * Pass notification to remoteproc virtio + * + * Return: 0. having return is to satisfy the idr_for_each() function + * pointer input argument requirement. + **/ +static int event_notified_idr_cb(int id, void *ptr, void *data) +{ + struct rproc *rproc = data; + + if (rproc_vq_interrupt(rproc, id) == IRQ_NONE) + dev_dbg(&rproc->dev, "data not found for vqid=%d\n", id); + + return 0; +} + +/** + * handle_event_notified() - remoteproc notification work function + * @work: pointer to the work structure + * + * It checks each registered remoteproc notify IDs. + */ +static void handle_event_notified(struct work_struct *work) +{ + struct mbox_info *ipi; + struct rproc *rproc; + + ipi = container_of(work, struct mbox_info, mbox_work); + rproc = ipi->r5_core->rproc; + + /* + * We only use IPI for interrupt. The RPU firmware side may or may + * not write the notifyid when it trigger IPI. + * And thus, we scan through all the registered notifyids and + * find which one is valid to get the message. + * Even if message from firmware is NULL, we attempt to get vqid + */ + idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc); +} + +/** + * zynqmp_r5_mb_rx_cb() - receive channel mailbox callback + * @cl: mailbox client + * @msg: message pointer + * + * Receive data from ipi buffer, ack interrupt and then + * it will schedule the R5 notification work. + */ +static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *msg) +{ + struct zynqmp_ipi_message *ipi_msg, *buf_msg; + struct mbox_info *ipi; + size_t len; + + ipi = container_of(cl, struct mbox_info, mbox_cl); + + /* copy data from ipi buffer to r5_core */ + ipi_msg = (struct zynqmp_ipi_message *)msg; + buf_msg = (struct zynqmp_ipi_message *)ipi->rx_mc_buf; + len = ipi_msg->len; + if (len > IPI_BUF_LEN_MAX) { + dev_warn(cl->dev, "msg size exceeded than %d\n", + IPI_BUF_LEN_MAX); + len = IPI_BUF_LEN_MAX; + } + buf_msg->len = len; + memcpy(buf_msg->data, ipi_msg->data, len); + + /* received and processed interrupt ack */ + if (mbox_send_message(ipi->rx_chan, NULL) < 0) + dev_err(cl->dev, "ack failed to mbox rx_chan\n"); + + schedule_work(&ipi->mbox_work); +} + +/** + * zynqmp_r5_setup_mbox() - Setup mailboxes related properties + * this is used for each individual R5 core + * + * @cdev: child node device + * + * Function to setup mailboxes related properties + * return : NULL if failed else pointer to mbox_info + */ +static struct mbox_info *zynqmp_r5_setup_mbox(struct device *cdev) +{ + struct mbox_client *mbox_cl; + struct mbox_info *ipi; + + ipi = kzalloc(sizeof(*ipi), GFP_KERNEL); + if (!ipi) + return NULL; + + mbox_cl = &ipi->mbox_cl; + mbox_cl->rx_callback = zynqmp_r5_mb_rx_cb; + mbox_cl->tx_block = false; + mbox_cl->knows_txdone = false; + mbox_cl->tx_done = NULL; + mbox_cl->dev = cdev; + + /* Request TX and RX channels */ + ipi->tx_chan = mbox_request_channel_byname(mbox_cl, "tx"); + if (IS_ERR(ipi->tx_chan)) { + ipi->tx_chan = NULL; + kfree(ipi); + dev_warn(cdev, "mbox tx channel request failed\n"); + return NULL; + } + + ipi->rx_chan = mbox_request_channel_byname(mbox_cl, "rx"); + if (IS_ERR(ipi->rx_chan)) { + mbox_free_channel(ipi->tx_chan); + ipi->rx_chan = NULL; + ipi->tx_chan = NULL; + kfree(ipi); + dev_warn(cdev, "mbox rx channel request failed\n"); + return NULL; + } + + INIT_WORK(&ipi->mbox_work, handle_event_notified); + + return ipi; +} + +static void zynqmp_r5_free_mbox(struct mbox_info *ipi) +{ + if (!ipi) + return; + + if (ipi->tx_chan) { + mbox_free_channel(ipi->tx_chan); + ipi->tx_chan = NULL; + } + + if (ipi->rx_chan) { + mbox_free_channel(ipi->rx_chan); + ipi->rx_chan = NULL; + } + + kfree(ipi); +} + +/* + * zynqmp_r5_core_kick() - kick a firmware if mbox is provided + * @rproc: r5 core's corresponding rproc structure + * @vqid: virtqueue ID + */ +static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid) +{ + struct zynqmp_r5_core *r5_core = rproc->priv; + struct device *dev = r5_core->dev; + struct zynqmp_ipi_message *mb_msg; + struct mbox_info *ipi; + int ret; + + ipi = r5_core->ipi; + if (!ipi) + return; + + mb_msg = (struct zynqmp_ipi_message *)ipi->tx_mc_buf; + memcpy(mb_msg->data, &vqid, sizeof(vqid)); + mb_msg->len = sizeof(vqid); + ret = mbox_send_message(ipi->tx_chan, mb_msg); + if (ret < 0) + dev_warn(dev, "failed to send message\n"); +} + /* * zynqmp_r5_set_mode() * @@ -617,7 +819,7 @@ static int zynqmp_r5_rproc_unprepare(struct rproc *rproc) return 0; } -static const struct rproc_ops zynqmp_r5_rproc_ops = { +static struct rproc_ops zynqmp_r5_rproc_ops = { .prepare = zynqmp_r5_rproc_prepare, .unprepare = zynqmp_r5_rproc_unprepare, .start = zynqmp_r5_rproc_start, @@ -642,6 +844,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) { struct zynqmp_r5_core *r5_core; struct rproc *r5_rproc; + struct mbox_info *ipi; int ret; /* Set up DMA mask */ @@ -649,12 +852,23 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) if (ret) return ERR_PTR(ret); + /* + * If mailbox nodes are disabled using "status" property then setting up + * mailbox channels will be failed. In that case we don't really need + * kick() operation. Include .kick() only if mbox channels are acquired + * successfully. + */ + ipi = zynqmp_r5_setup_mbox(cdev); + if (ipi) + zynqmp_r5_rproc_ops.kick = zynqmp_r5_rproc_kick; + /* Allocate remoteproc instance */ r5_rproc = rproc_alloc(cdev, dev_name(cdev), &zynqmp_r5_rproc_ops, NULL, sizeof(struct zynqmp_r5_core)); if (!r5_rproc) { dev_err(cdev, "failed to allocate memory for rproc instance\n"); + zynqmp_r5_free_mbox(ipi); return ERR_PTR(-ENOMEM); } @@ -665,6 +879,7 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) if (!r5_core->np) { dev_err(cdev, "can't get device node for r5 core\n"); ret = -EINVAL; + zynqmp_r5_free_mbox(ipi); goto free_rproc; } @@ -672,10 +887,17 @@ static struct zynqmp_r5_core *zynqmp_r5_add_rproc_core(struct device *cdev) ret = rproc_add(r5_rproc); if (ret) { dev_err(cdev, "failed to add r5 remoteproc\n"); + zynqmp_r5_free_mbox(ipi); goto free_rproc; } + if (ipi) { + r5_core->ipi = ipi; + ipi->r5_core = r5_core; + } + r5_core->rproc = r5_rproc; + return r5_core; free_rproc: @@ -918,6 +1140,7 @@ static int zynqmp_r5_cluster_init(struct zynqmp_r5_cluster *cluster) while (i >= 0) { put_device(child_devs[i]); if (r5_cores[i]) { + zynqmp_r5_free_mbox(r5_cores[i]->ipi); of_reserved_mem_device_release(r5_cores[i]->dev); rproc_del(r5_cores[i]->rproc); rproc_free(r5_cores[i]->rproc); @@ -942,6 +1165,7 @@ static void zynqmp_r5_cluster_exit(void *data) for (i = 0; i < cluster->core_count; i++) { r5_core = cluster->r5_cores[i]; + zynqmp_r5_free_mbox(r5_core->ipi); of_reserved_mem_device_release(r5_core->dev); put_device(r5_core->dev); rproc_del(r5_core->rproc);
This patch makes each r5 core mailbox client and uses tx and rx channels to send and receive data to/from remote processor respectively. This is needed for rpmsg communication to remote processor. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> --- Changes in v3: - fix multi-line comment format - do not mixup mailbox information with memory-regions - fix redundant dev_warn for split mode - setting up mailboxes should return an error code - redesign driver to move mailbox setup during driver probe - add .kick function only if mailbox setup is success v2: https://lore.kernel.org/all/20230126213154.1707300-1-tanmay.shah@amd.com/ drivers/remoteproc/xlnx_r5_remoteproc.c | 228 +++++++++++++++++++++++- 1 file changed, 226 insertions(+), 2 deletions(-)