diff mbox series

[v2,1/2] remoteproc: Make rproc_get_by_phandle() work for clusters

Message ID 20230322040933.924813-2-tanmay.shah@amd.com (mailing list archive)
State Superseded
Headers show
Series remoteproc: get rproc devices for clusters | expand

Commit Message

Tanmay Shah March 22, 2023, 4:09 a.m. UTC
From: Mathieu Poirier <mathieu.poirier@linaro.org>

Multi-cluster remoteproc designs typically have the following DT
declaration:

	remoteproc_cluster {
		compatible = "soc,remoteproc-cluster";

                core0: core0 {
			compatible = "soc,remoteproc-core"
                        memory-region;
                        sram;
                };

                core1: core1 {
			compatible = "soc,remoteproc-core"
                        memory-region;
                        sram;
                }
        };

A driver exists for the cluster rather than the individual cores
themselves so that operation mode and HW specific configurations
applicable to the cluster can be made.

Because the driver exists at the cluster level and not the individual
core level, function rproc_get_by_phandle() fails to return the
remoteproc associated with the phandled it is called for.

This patch enhances rproc_get_by_phandle() by looking for the cluster's
driver when the driver for the immediate remoteproc's parent is not
found.

Reported-by: Ben Levinsky <ben.levinsky@xilinx.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Tested-by: Ben Levinsky <ben.levinsky@amd.com>
---
 drivers/remoteproc/remoteproc_core.c | 28 +++++++++++++++++++++++++++-
 1 file changed, 27 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 80072b6b6283..a3e7c8798381 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -33,6 +33,7 @@ 
 #include <linux/idr.h>
 #include <linux/elf.h>
 #include <linux/crc32.h>
+#include <linux/of_platform.h>
 #include <linux/of_reserved_mem.h>
 #include <linux/virtio_ids.h>
 #include <linux/virtio_ring.h>
@@ -2111,7 +2112,9 @@  EXPORT_SYMBOL(rproc_detach);
 #ifdef CONFIG_OF
 struct rproc *rproc_get_by_phandle(phandle phandle)
 {
+	struct platform_device *cluster_pdev;
 	struct rproc *rproc = NULL, *r;
+	struct device_driver *driver;
 	struct device_node *np;
 
 	np = of_find_node_by_phandle(phandle);
@@ -2122,7 +2125,30 @@  struct rproc *rproc_get_by_phandle(phandle phandle)
 	list_for_each_entry_rcu(r, &rproc_list, node) {
 		if (r->dev.parent && device_match_of_node(r->dev.parent, np)) {
 			/* prevent underlying implementation from being removed */
-			if (!try_module_get(r->dev.parent->driver->owner)) {
+
+			/*
+			 * If the remoteproc's parent has a driver, the
+			 * remoteproc is not part of a cluster and we can use
+			 * that driver.
+			 */
+			driver = r->dev.parent->driver;
+
+			/*
+			 * If the remoteproc's parent does not have a driver,
+			 * look for the driver associated with the cluster.
+			 */
+			if (!driver) {
+				cluster_pdev = of_find_device_by_node(np->parent);
+				if (!cluster_pdev) {
+					dev_err(&r->dev, "can't get parent\n");
+					break;
+				}
+
+				driver = cluster_pdev->dev.driver;
+				put_device(&cluster_pdev->dev);
+			}
+
+			if (!try_module_get(driver->owner)) {
 				dev_err(&r->dev, "can't get owner\n");
 				break;
 			}