| Message ID | 20240103221124.3063683-2-tanmay.shah@amd.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | remoteproc: get rproc devices for clusters | expand |
Hi Tanmay, Thanks for the refactoring, this is in line with what Bjorn and I have talked about at Plumbers. Please see my comments below. On Wed, Jan 03, 2024 at 02:11:24PM -0800, Tanmay Shah wrote: > From: Mathieu Poirier <mathieu.poirier@linaro.org> > > Multi-cluster remoteproc designs typically have the following DT > declaration: > > remoteproc_cluster { > compatible = "soc,remoteproc-cluster"; > > core0: core0 { > compatible = "soc,remoteproc-core" > memory-region; > sram; > }; > > core1: core1 { > compatible = "soc,remoteproc-core" > memory-region; > sram; > } > }; > > A driver exists for the cluster rather than the individual cores > themselves so that operation mode and HW specific configurations > applicable to the cluster can be made. > > Because the driver exists at the cluster level and not the individual > core level, function rproc_get_by_phandle() fails to return the > remoteproc associated with the phandled it is called for. > > This patch enhances rproc_get_by_phandle() by looking for the cluster's > driver when the driver for the immediate remoteproc's parent is not > found. > > Reported-by: Ben Levinsky <ben.levinsky@xilinx.com> > Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Humm... You wrote the code in this patch so you also deserve some credit. If I end up applying this set I will add myself as a co-developer, i.e Co-developed-by:, and add your SoB. If you end up re-spinning this set then simply do so for the next revision. As far as I am concerned this patchset is ready. I will wait to see if other people would like to see something adjusted. Mathieu > --- > drivers/remoteproc/remoteproc_core.c | 23 ++++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 695cce218e8c..0b3b34085e2f 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -33,6 +33,7 @@ > #include <linux/idr.h> > #include <linux/elf.h> > #include <linux/crc32.h> > +#include <linux/of_platform.h> > #include <linux/of_reserved_mem.h> > #include <linux/virtio_ids.h> > #include <linux/virtio_ring.h> > @@ -2112,6 +2113,7 @@ EXPORT_SYMBOL(rproc_detach); > struct rproc *rproc_get_by_phandle(phandle phandle) > { > struct rproc *rproc = NULL, *r; > + struct device_driver *driver; > struct device_node *np; > > np = of_find_node_by_phandle(phandle); > @@ -2122,7 +2124,26 @@ struct rproc *rproc_get_by_phandle(phandle phandle) > list_for_each_entry_rcu(r, &rproc_list, node) { > if (r->dev.parent && device_match_of_node(r->dev.parent, np)) { > /* prevent underlying implementation from being removed */ > - if (!try_module_get(r->dev.parent->driver->owner)) { > + > + /* > + * If the remoteproc's parent has a driver, the > + * remoteproc is not part of a cluster and we can use > + * that driver. > + */ > + driver = r->dev.parent->driver; > + > + /* > + * If the remoteproc's parent does not have a driver, > + * look for the driver associated with the cluster. > + */ > + if (!driver) { > + if (r->dev.parent->parent) > + driver = r->dev.parent->parent->driver; > + if (!driver) > + break; > + } > + > + if (!try_module_get(driver->owner)) { > dev_err(&r->dev, "can't get owner\n"); > break; > } > -- > 2.25.1 >
On Wed, Jan 03, 2024 at 02:11:24PM -0800, Tanmay Shah wrote: > From: Mathieu Poirier <mathieu.poirier@linaro.org> > > Multi-cluster remoteproc designs typically have the following DT > declaration: > > remoteproc_cluster { > compatible = "soc,remoteproc-cluster"; > > core0: core0 { > compatible = "soc,remoteproc-core" > memory-region; > sram; > }; > > core1: core1 { > compatible = "soc,remoteproc-core" > memory-region; > sram; > } > }; The indention of this snippet looks weird in my client, because it contains a mixture of tabs and spaces. Please clean that up, and while at it, '_' is not a valid character in DT node names... > > A driver exists for the cluster rather than the individual cores > themselves so that operation mode and HW specific configurations > applicable to the cluster can be made. > > Because the driver exists at the cluster level and not the individual > core level, function rproc_get_by_phandle() fails to return the > remoteproc associated with the phandled it is called for. > > This patch enhances rproc_get_by_phandle() by looking for the cluster's > driver when the driver for the immediate remoteproc's parent is not > found. > > Reported-by: Ben Levinsky <ben.levinsky@xilinx.com> > Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> The s-o-b is used to certify the origin of the patch, Mathieu provided his signature here, then as you handle the patch you need to append your s-o-b to provide the same certification. The for appropriate tracking of reality, Mathieu should append his s-o-b when/if he applies the patch. TL;DR please add your S-o-b after Mathieu's. Change itself looks good to me. Regards, Bjorn > --- > drivers/remoteproc/remoteproc_core.c | 23 ++++++++++++++++++++++- > 1 file changed, 22 insertions(+), 1 deletion(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 695cce218e8c..0b3b34085e2f 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -33,6 +33,7 @@ > #include <linux/idr.h> > #include <linux/elf.h> > #include <linux/crc32.h> > +#include <linux/of_platform.h> > #include <linux/of_reserved_mem.h> > #include <linux/virtio_ids.h> > #include <linux/virtio_ring.h> > @@ -2112,6 +2113,7 @@ EXPORT_SYMBOL(rproc_detach); > struct rproc *rproc_get_by_phandle(phandle phandle) > { > struct rproc *rproc = NULL, *r; > + struct device_driver *driver; > struct device_node *np; > > np = of_find_node_by_phandle(phandle); > @@ -2122,7 +2124,26 @@ struct rproc *rproc_get_by_phandle(phandle phandle) > list_for_each_entry_rcu(r, &rproc_list, node) { > if (r->dev.parent && device_match_of_node(r->dev.parent, np)) { > /* prevent underlying implementation from being removed */ > - if (!try_module_get(r->dev.parent->driver->owner)) { > + > + /* > + * If the remoteproc's parent has a driver, the > + * remoteproc is not part of a cluster and we can use > + * that driver. > + */ > + driver = r->dev.parent->driver; > + > + /* > + * If the remoteproc's parent does not have a driver, > + * look for the driver associated with the cluster. > + */ > + if (!driver) { > + if (r->dev.parent->parent) > + driver = r->dev.parent->parent->driver; > + if (!driver) > + break; > + } > + > + if (!try_module_get(driver->owner)) { > dev_err(&r->dev, "can't get owner\n"); > break; > } > -- > 2.25.1 >
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 695cce218e8c..0b3b34085e2f 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -33,6 +33,7 @@ #include <linux/idr.h> #include <linux/elf.h> #include <linux/crc32.h> +#include <linux/of_platform.h> #include <linux/of_reserved_mem.h> #include <linux/virtio_ids.h> #include <linux/virtio_ring.h> @@ -2112,6 +2113,7 @@ EXPORT_SYMBOL(rproc_detach); struct rproc *rproc_get_by_phandle(phandle phandle) { struct rproc *rproc = NULL, *r; + struct device_driver *driver; struct device_node *np; np = of_find_node_by_phandle(phandle); @@ -2122,7 +2124,26 @@ struct rproc *rproc_get_by_phandle(phandle phandle) list_for_each_entry_rcu(r, &rproc_list, node) { if (r->dev.parent && device_match_of_node(r->dev.parent, np)) { /* prevent underlying implementation from being removed */ - if (!try_module_get(r->dev.parent->driver->owner)) { + + /* + * If the remoteproc's parent has a driver, the + * remoteproc is not part of a cluster and we can use + * that driver. + */ + driver = r->dev.parent->driver; + + /* + * If the remoteproc's parent does not have a driver, + * look for the driver associated with the cluster. + */ + if (!driver) { + if (r->dev.parent->parent) + driver = r->dev.parent->parent->driver; + if (!driver) + break; + } + + if (!try_module_get(driver->owner)) { dev_err(&r->dev, "can't get owner\n"); break; }