@@ -598,16 +598,13 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
/* use remaining reserved memory regions for static carveouts */
for (i = 0; i < num_rmems; i++) {
rmem_np = of_parse_phandle(np, "memory-region", i + 1);
- if (!rmem_np) {
- ret = -EINVAL;
- goto unmap_rmem;
- }
+ if (!rmem_np)
+ return -EINVAL;
rmem = of_reserved_mem_lookup(rmem_np);
if (!rmem) {
of_node_put(rmem_np);
- ret = -EINVAL;
- goto unmap_rmem;
+ return -EINVAL;
}
of_node_put(rmem_np);
@@ -615,12 +612,11 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
/* 64-bit address regions currently not supported */
kproc->rmem[i].dev_addr = (u32)rmem->base;
kproc->rmem[i].size = rmem->size;
- kproc->rmem[i].cpu_addr = ioremap_wc(rmem->base, rmem->size);
+ kproc->rmem[i].cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
if (!kproc->rmem[i].cpu_addr) {
dev_err(dev, "failed to map reserved memory#%d at %pa of size %pa\n",
i + 1, &rmem->base, &rmem->size);
- ret = -ENOMEM;
- goto unmap_rmem;
+ return -ENOMEM;
}
dev_dbg(dev, "reserved memory%d: bus addr %pa size 0x%zx va %pK da 0x%x\n",
@@ -631,19 +627,6 @@ static int k3_dsp_reserved_mem_init(struct k3_dsp_rproc *kproc)
kproc->num_rmems = num_rmems;
return 0;
-
-unmap_rmem:
- for (i--; i >= 0; i--)
- iounmap(kproc->rmem[i].cpu_addr);
- return ret;
-}
-
-static void k3_dsp_reserved_mem_exit(struct k3_dsp_rproc *kproc)
-{
- int i;
-
- for (i = 0; i < kproc->num_rmems; i++)
- iounmap(kproc->rmem[i].cpu_addr);
}
static void k3_dsp_release_tsp(void *data)
@@ -752,10 +735,8 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id,
NULL, &p_state);
- if (ret) {
- dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
- goto release_mem;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
/* configure J721E devices for either remoteproc or IPC-only mode */
if (p_state) {
@@ -779,8 +760,7 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
if (data->uses_lreset) {
ret = reset_control_status(kproc->reset);
if (ret < 0) {
- dev_err_probe(dev, ret, "failed to get reset status\n");
- goto release_mem;
+ return dev_err_probe(dev, ret, "failed to get reset status\n");
} else if (ret == 0) {
dev_warn(dev, "local reset is deasserted for device\n");
k3_dsp_rproc_reset(kproc);
@@ -789,18 +769,12 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
}
ret = rproc_add(rproc);
- if (ret) {
- dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
- goto release_mem;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
platform_set_drvdata(pdev, kproc);
return 0;
-
-release_mem:
- k3_dsp_reserved_mem_exit(kproc);
- return ret;
}
static void k3_dsp_rproc_remove(struct platform_device *pdev)
@@ -820,8 +794,6 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
}
rproc_del(kproc->rproc);
-
- k3_dsp_reserved_mem_exit(kproc);
}
static const struct k3_dsp_mem_data c66_mems[] = {
Use a device lifecycle managed ioremap helper function. This helps prevent mistakes like unmapping out of order in cleanup functions and forgetting to unmap on all error paths. Signed-off-by: Andrew Davis <afd@ti.com> --- drivers/remoteproc/ti_k3_dsp_remoteproc.c | 48 +++++------------------ 1 file changed, 10 insertions(+), 38 deletions(-)