diff mbox series

[2/2] remoteproc: qcom: add hexagon based WCSS secure PIL driver

Message ID 20240820085517.435566-3-quic_gokulsri@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add new driver for WCSS secure PIL loading | expand

Commit Message

Gokul Sriram Palanisamy Aug. 20, 2024, 8:55 a.m. UTC
From: Vignesh Viswanathan <quic_viswanat@quicinc.com>

Add support to bring up hexagon based WCSS secure PIL remoteproc.
IPQ5332, IPQ9574 supports secure PIL remoteproc.

Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
---
 drivers/remoteproc/Kconfig              |  22 ++
 drivers/remoteproc/Makefile             |   1 +
 drivers/remoteproc/qcom_q6v5_wcss_sec.c | 363 ++++++++++++++++++++++++
 3 files changed, 386 insertions(+)
 create mode 100644 drivers/remoteproc/qcom_q6v5_wcss_sec.c

Comments

Krzysztof Kozlowski Aug. 20, 2024, 11:25 a.m. UTC | #1
On Tue, Aug 20, 2024 at 02:25:15PM +0530, Gokul Sriram Palanisamy wrote:
> From: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> 
> Add support to bring up hexagon based WCSS secure PIL remoteproc.
> IPQ5332, IPQ9574 supports secure PIL remoteproc.
> 
> Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
> +static int wcss_sec_dump_segments(struct rproc *rproc,
> +				  const struct firmware *fw)
> +{
> +	struct device *dev = rproc->dev.parent;
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	int num_segs, index = 0;
> +	int ret;
> +
> +	/* Parse through additional reserved memory regions for the rproc
> +	 * and add them to the coredump segments
> +	 */
> +	num_segs = of_count_phandle_with_args(dev->of_node,
> +					      "memory-region", NULL);
> +	while (index < num_segs) {
> +		node = of_parse_phandle(dev->of_node,
> +					"memory-region", index);
> +		if (!node)
> +			return -EINVAL;
> +
> +		rmem = of_reserved_mem_lookup(node);
> +		if (!rmem) {
> +			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
> +				index, num_segs);

Leaking refcnt.

> +			return -EINVAL;
> +		}
> +
> +		of_node_put(node);
> +
> +		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
> +			&rmem->base, &rmem->size);
> +		ret = rproc_coredump_add_custom_segment(rproc,
> +							rmem->base,
> +							rmem->size,
> +							wcss_sec_copy_segment,
> +							NULL);
> +		if (ret)
> +			return ret;
> +
> +		index++;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct rproc_ops wcss_sec_ops = {
> +	.start = wcss_sec_start,
> +	.stop = wcss_sec_stop,
> +	.da_to_va = wcss_sec_da_to_va,
> +	.load = wcss_sec_load,
> +	.get_boot_addr = rproc_elf_get_boot_addr,
> +	.panic = wcss_sec_panic,
> +	.parse_fw = wcss_sec_dump_segments,
> +};
> +
> +static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
> +{
> +	struct reserved_mem *rmem = NULL;
> +	struct device_node *node;
> +	struct device *dev = wcss->dev;
> +
> +	node = of_parse_phandle(dev->of_node, "memory-region", 0);
> +	if (node) {
> +		rmem = of_reserved_mem_lookup(node);
> +	} else {

No, that's over complicated.

Just if (!node) { error handling }.

> +		dev_err(dev, "can't find phandle memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	of_node_put(node);
> +
> +	if (!rmem) {
> +		dev_err(dev, "unable to acquire memory-region\n");
> +		return -EINVAL;
> +	}
> +
> +	wcss->mem_phys = rmem->base;
> +	wcss->mem_reloc = rmem->base;
> +	wcss->mem_size = rmem->size;
> +	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
> +	if (!wcss->mem_region) {
> +		dev_err(dev, "unable to map memory region: %pa+%pa\n",
> +			&rmem->base, &rmem->size);
> +		return -ENOMEM;
> +	}
> +
> +	return 0;
> +}
> +

...

> +static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
> +{
> +	int ret;
> +	struct device *dev = wcss->dev;
> +
> +	wcss->im_sleep = devm_clk_get(wcss->dev, "im_sleep");
> +	if (IS_ERR(wcss->im_sleep)) {
> +		ret = PTR_ERR(wcss->im_sleep);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "failed to get im_sleep clock");

Syntax is return dev_err_probe.

> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(wcss->im_sleep);
> +	if (ret) {
> +		dev_err(dev, "could not enable im_sleep clk\n");
> +		return ret;

Just use devm_clk_get_enabled.

> +	}
> +
> +	return 0;

Best regards,
Krzysztof
Gokul Sriram Palanisamy Aug. 22, 2024, 9:01 a.m. UTC | #2
On 8/20/2024 4:55 PM, Krzysztof Kozlowski wrote:
> On Tue, Aug 20, 2024 at 02:25:15PM +0530, Gokul Sriram Palanisamy wrote:
>> From: Vignesh Viswanathan <quic_viswanat@quicinc.com>
>>
>> Add support to bring up hexagon based WCSS secure PIL remoteproc.
>> IPQ5332, IPQ9574 supports secure PIL remoteproc.
>>
>> Signed-off-by: Vignesh Viswanathan <quic_viswanat@quicinc.com>
>> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
>> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
>> +static int wcss_sec_dump_segments(struct rproc *rproc,
>> +				  const struct firmware *fw)
>> +{
>> +	struct device *dev = rproc->dev.parent;
>> +	struct reserved_mem *rmem = NULL;
>> +	struct device_node *node;
>> +	int num_segs, index = 0;
>> +	int ret;
>> +
>> +	/* Parse through additional reserved memory regions for the rproc
>> +	 * and add them to the coredump segments
>> +	 */
>> +	num_segs = of_count_phandle_with_args(dev->of_node,
>> +					      "memory-region", NULL);
>> +	while (index < num_segs) {
>> +		node = of_parse_phandle(dev->of_node,
>> +					"memory-region", index);
>> +		if (!node)
>> +			return -EINVAL;
>> +
>> +		rmem = of_reserved_mem_lookup(node);
>> +		if (!rmem) {
>> +			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
>> +				index, num_segs);
> Leaking refcnt.
Got it. Will update. Thank you.
>> +			return -EINVAL;
>> +		}
>> +
>> +		of_node_put(node);
>> +
>> +		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
>> +			&rmem->base, &rmem->size);
>> +		ret = rproc_coredump_add_custom_segment(rproc,
>> +							rmem->base,
>> +							rmem->size,
>> +							wcss_sec_copy_segment,
>> +							NULL);
>> +		if (ret)
>> +			return ret;
>> +
>> +		index++;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct rproc_ops wcss_sec_ops = {
>> +	.start = wcss_sec_start,
>> +	.stop = wcss_sec_stop,
>> +	.da_to_va = wcss_sec_da_to_va,
>> +	.load = wcss_sec_load,
>> +	.get_boot_addr = rproc_elf_get_boot_addr,
>> +	.panic = wcss_sec_panic,
>> +	.parse_fw = wcss_sec_dump_segments,
>> +};
>> +
>> +static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
>> +{
>> +	struct reserved_mem *rmem = NULL;
>> +	struct device_node *node;
>> +	struct device *dev = wcss->dev;
>> +
>> +	node = of_parse_phandle(dev->of_node, "memory-region", 0);
>> +	if (node) {
>> +		rmem = of_reserved_mem_lookup(node);
>> +	} else {
> No, that's over complicated.
>
> Just if (!node) { error handling }.
Ok. Will update.
>> +		dev_err(dev, "can't find phandle memory-region\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	of_node_put(node);
>> +
>> +	if (!rmem) {
>> +		dev_err(dev, "unable to acquire memory-region\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	wcss->mem_phys = rmem->base;
>> +	wcss->mem_reloc = rmem->base;
>> +	wcss->mem_size = rmem->size;
>> +	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
>> +	if (!wcss->mem_region) {
>> +		dev_err(dev, "unable to map memory region: %pa+%pa\n",
>> +			&rmem->base, &rmem->size);
>> +		return -ENOMEM;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
> ...
>
>> +static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
>> +{
>> +	int ret;
>> +	struct device *dev = wcss->dev;
>> +
>> +	wcss->im_sleep = devm_clk_get(wcss->dev, "im_sleep");
>> +	if (IS_ERR(wcss->im_sleep)) {
>> +		ret = PTR_ERR(wcss->im_sleep);
>> +		if (ret != -EPROBE_DEFER)
>> +			dev_err(dev, "failed to get im_sleep clock");
> Syntax is return dev_err_probe.
Thanks. Will update.
>> +		return ret;
>> +	}
>> +
>> +	ret = clk_prepare_enable(wcss->im_sleep);
>> +	if (ret) {
>> +		dev_err(dev, "could not enable im_sleep clk\n");
>> +		return ret;
> Just use devm_clk_get_enabled.
Will update.
>> +	}
>> +
>> +	return 0;
> Best regards,
> Krzysztof
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index dda2ada215b7..368405825d83 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -255,6 +255,28 @@  config QCOM_Q6V5_WCSS
 	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
 	  a non-TrustZone wireless subsystem.
 
+config QCOM_Q6V5_WCSS_SEC
+	tristate "Qualcomm Hexagon based WCSS Secure Peripheral Image Loader"
+	depends on OF && ARCH_QCOM
+	depends on QCOM_SMEM
+	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
+	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
+	depends on QCOM_SYSMON || QCOM_SYSMON=n
+	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
+	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
+	select QCOM_MDT_LOADER
+	select QCOM_PIL_INFO
+	select QCOM_Q6V5_COMMON
+	select QCOM_RPROC_COMMON
+	select QCOM_SCM
+	help
+	  Say y here to support the Qualcomm Secure Peripheral Image Loader
+	  for the Hexagon based remote processors on e.g. IPQ5332.
+
+	  This is TrustZone wireless subsystem. The firmware is
+	  verified and booted with the help of the Peripheral Authentication
+	  System (PAS) in TrustZone.
+
 config QCOM_SYSMON
 	tristate "Qualcomm sysmon driver"
 	depends on RPMSG
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index 91314a9b43ce..54530d7fa510 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_QCOM_Q6V5_ADSP)		+= qcom_q6v5_adsp.o
 obj-$(CONFIG_QCOM_Q6V5_MSS)		+= qcom_q6v5_mss.o
 obj-$(CONFIG_QCOM_Q6V5_PAS)		+= qcom_q6v5_pas.o
 obj-$(CONFIG_QCOM_Q6V5_WCSS)		+= qcom_q6v5_wcss.o
+obj-$(CONFIG_QCOM_Q6V5_WCSS_SEC)	+= qcom_q6v5_wcss_sec.o
 obj-$(CONFIG_QCOM_SYSMON)		+= qcom_sysmon.o
 obj-$(CONFIG_QCOM_WCNSS_PIL)		+= qcom_wcnss_pil.o
 qcom_wcnss_pil-y			+= qcom_wcnss.o
diff --git a/drivers/remoteproc/qcom_q6v5_wcss_sec.c b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
new file mode 100644
index 000000000000..8c47cf35a00b
--- /dev/null
+++ b/drivers/remoteproc/qcom_q6v5_wcss_sec.c
@@ -0,0 +1,363 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Linaro Ltd.
+ * Copyright (C) 2014 Sony Mobile Communications AB
+ * Copyright (c) 2012-2018, 2024 The Linux Foundation. All rights reserved.
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/firmware/qcom/qcom_scm.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/soc/qcom/mdt_loader.h>
+#include <linux/soc/qcom/smem.h>
+#include <linux/soc/qcom/smem_state.h>
+#include "qcom_common.h"
+#include "qcom_q6v5.h"
+
+#include "remoteproc_internal.h"
+
+#define WCSS_CRASH_REASON		421
+
+#define WCSS_PAS_ID			0x6
+#define MPD_WCSS_PAS_ID			0xD
+
+struct wcss_sec {
+	struct device *dev;
+	struct qcom_rproc_glink glink_subdev;
+	struct qcom_rproc_ssr ssr_subdev;
+	struct qcom_q6v5 q6;
+	phys_addr_t mem_phys;
+	phys_addr_t mem_reloc;
+	void *mem_region;
+	size_t mem_size;
+	const struct wcss_data *desc;
+	const char *fw_name;
+
+	struct clk *im_sleep;
+};
+
+struct wcss_data {
+	u32 pasid;
+	const struct rproc_ops *ops;
+	bool need_auto_boot;
+	int (*init_clk)(struct wcss_sec *wcss);
+};
+
+static int wcss_sec_start(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+	int ret;
+
+	qcom_q6v5_prepare(&wcss->q6);
+
+	ret = qcom_scm_pas_auth_and_reset(desc->pasid);
+	if (ret) {
+		dev_err(dev, "wcss_reset failed\n");
+		return ret;
+	}
+
+	ret = qcom_q6v5_wait_for_start(&wcss->q6, 5 * HZ);
+	if (ret == -ETIMEDOUT)
+		dev_err(dev, "start timed out\n");
+
+	return ret;
+}
+
+static int wcss_sec_stop(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+	int ret;
+
+	ret = qcom_scm_pas_shutdown(desc->pasid);
+	if (ret) {
+		dev_err(dev, "not able to shutdown\n");
+		return ret;
+	}
+	qcom_q6v5_unprepare(&wcss->q6);
+
+	return 0;
+}
+
+static void *wcss_sec_da_to_va(struct rproc *rproc, u64 da, size_t len,
+			       bool *is_iomem)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	int offset;
+
+	offset = da - wcss->mem_reloc;
+	if (offset < 0 || offset + len > wcss->mem_size)
+		return NULL;
+
+	return wcss->mem_region + offset;
+}
+
+static int wcss_sec_load(struct rproc *rproc, const struct firmware *fw)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	const struct wcss_data *desc = of_device_get_match_data(dev);
+
+	return qcom_mdt_load(dev, fw, rproc->firmware, desc->pasid,
+			     wcss->mem_region, wcss->mem_phys, wcss->mem_size,
+			     &wcss->mem_reloc);
+}
+
+static unsigned long wcss_sec_panic(struct rproc *rproc)
+{
+	struct wcss_sec *wcss = rproc->priv;
+
+	return qcom_q6v5_panic(&wcss->q6);
+}
+
+static void wcss_sec_copy_segment(struct rproc *rproc,
+				  struct rproc_dump_segment *segment,
+				  void *dest, size_t offset, size_t size)
+{
+	struct wcss_sec *wcss = rproc->priv;
+	struct device *dev = wcss->dev;
+	void *ptr;
+
+	ptr = devm_ioremap_wc(dev, segment->da, segment->size);
+	if (!ptr) {
+		dev_err(dev, "Failed to ioremap segment %pad size %zx\n",
+			&segment->da, segment->size);
+		return;
+	}
+
+	if (size <= segment->size - offset)
+		memcpy(dest, ptr + offset, size);
+	else
+		dev_err(dev, "Copy size greater than segment size. Skipping\n");
+	devm_iounmap(dev, ptr);
+}
+
+static int wcss_sec_dump_segments(struct rproc *rproc,
+				  const struct firmware *fw)
+{
+	struct device *dev = rproc->dev.parent;
+	struct reserved_mem *rmem = NULL;
+	struct device_node *node;
+	int num_segs, index = 0;
+	int ret;
+
+	/* Parse through additional reserved memory regions for the rproc
+	 * and add them to the coredump segments
+	 */
+	num_segs = of_count_phandle_with_args(dev->of_node,
+					      "memory-region", NULL);
+	while (index < num_segs) {
+		node = of_parse_phandle(dev->of_node,
+					"memory-region", index);
+		if (!node)
+			return -EINVAL;
+
+		rmem = of_reserved_mem_lookup(node);
+		if (!rmem) {
+			dev_err(dev, "unable to acquire memory-region index %d num_segs %d\n",
+				index, num_segs);
+			return -EINVAL;
+		}
+
+		of_node_put(node);
+
+		dev_dbg(dev, "Adding segment 0x%pa size 0x%pa",
+			&rmem->base, &rmem->size);
+		ret = rproc_coredump_add_custom_segment(rproc,
+							rmem->base,
+							rmem->size,
+							wcss_sec_copy_segment,
+							NULL);
+		if (ret)
+			return ret;
+
+		index++;
+	}
+
+	return 0;
+}
+
+static const struct rproc_ops wcss_sec_ops = {
+	.start = wcss_sec_start,
+	.stop = wcss_sec_stop,
+	.da_to_va = wcss_sec_da_to_va,
+	.load = wcss_sec_load,
+	.get_boot_addr = rproc_elf_get_boot_addr,
+	.panic = wcss_sec_panic,
+	.parse_fw = wcss_sec_dump_segments,
+};
+
+static int wcss_sec_alloc_memory_region(struct wcss_sec *wcss)
+{
+	struct reserved_mem *rmem = NULL;
+	struct device_node *node;
+	struct device *dev = wcss->dev;
+
+	node = of_parse_phandle(dev->of_node, "memory-region", 0);
+	if (node) {
+		rmem = of_reserved_mem_lookup(node);
+	} else {
+		dev_err(dev, "can't find phandle memory-region\n");
+		return -EINVAL;
+	}
+
+	of_node_put(node);
+
+	if (!rmem) {
+		dev_err(dev, "unable to acquire memory-region\n");
+		return -EINVAL;
+	}
+
+	wcss->mem_phys = rmem->base;
+	wcss->mem_reloc = rmem->base;
+	wcss->mem_size = rmem->size;
+	wcss->mem_region = devm_ioremap_wc(dev, wcss->mem_phys, wcss->mem_size);
+	if (!wcss->mem_region) {
+		dev_err(dev, "unable to map memory region: %pa+%pa\n",
+			&rmem->base, &rmem->size);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int wcss_sec_probe(struct platform_device *pdev)
+{
+	struct wcss_sec *wcss;
+	struct rproc *rproc;
+	const char *fw_name = NULL;
+	const struct wcss_data *desc = of_device_get_match_data(&pdev->dev);
+	int ret;
+
+	if (!desc)
+		return -EINVAL;
+
+	ret = of_property_read_string(pdev->dev.of_node, "firmware-name",
+				      &fw_name);
+	if (ret < 0)
+		return ret;
+
+	rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, fw_name,
+			    sizeof(*wcss));
+	if (!rproc) {
+		dev_err(&pdev->dev, "failed to allocate rproc\n");
+		return -ENOMEM;
+	}
+
+	wcss = rproc->priv;
+	wcss->dev = &pdev->dev;
+	wcss->desc = desc;
+	wcss->fw_name = fw_name;
+
+	ret = wcss_sec_alloc_memory_region(wcss);
+	if (ret)
+		goto free_rproc;
+
+	if (desc->init_clk) {
+		ret = desc->init_clk(wcss);
+		if (ret)
+			goto free_rproc;
+	}
+
+	ret = qcom_q6v5_init(&wcss->q6, pdev, rproc,
+			     WCSS_CRASH_REASON, NULL, NULL);
+	if (ret)
+		goto free_rproc;
+
+	qcom_add_glink_subdev(rproc, &wcss->glink_subdev, "q6wcss");
+	qcom_add_ssr_subdev(rproc, &wcss->ssr_subdev, pdev->name);
+
+	rproc->auto_boot = desc->need_auto_boot;
+	rproc->dump_conf = RPROC_COREDUMP_INLINE;
+	rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE);
+
+	ret = rproc_add(rproc);
+	if (ret)
+		goto free_rproc;
+
+	platform_set_drvdata(pdev, rproc);
+
+	return 0;
+
+free_rproc:
+	rproc_free(rproc);
+
+	return ret;
+}
+
+static void wcss_sec_remove(struct platform_device *pdev)
+{
+	struct rproc *rproc = platform_get_drvdata(pdev);
+	struct wcss_sec *wcss = rproc->priv;
+
+	qcom_q6v5_deinit(&wcss->q6);
+
+	rproc_del(rproc);
+	rproc_free(rproc);
+}
+
+static int wcss_sec_ipq5332_init_clk(struct wcss_sec *wcss)
+{
+	int ret;
+	struct device *dev = wcss->dev;
+
+	wcss->im_sleep = devm_clk_get(wcss->dev, "im_sleep");
+	if (IS_ERR(wcss->im_sleep)) {
+		ret = PTR_ERR(wcss->im_sleep);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "failed to get im_sleep clock");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(wcss->im_sleep);
+	if (ret) {
+		dev_err(dev, "could not enable im_sleep clk\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct wcss_data wcss_sec_ipq5332_res_init = {
+	.pasid = MPD_WCSS_PAS_ID,
+	.ops = &wcss_sec_ops,
+	.bootargs_version = 2,
+	.init_clk = wcss_sec_ipq5332_init_clk,
+};
+
+static const struct wcss_data wcss_sec_ipq9574_res_init = {
+	.pasid = WCSS_PAS_ID,
+	.ops = &wcss_sec_ops,
+};
+
+static const struct of_device_id wcss_sec_of_match[] = {
+	{ .compatible = "qcom,ipq5332-wcss-sec-pil", .data = &wcss_sec_ipq5332_res_init },
+	{ .compatible = "qcom,ipq9574-wcss-sec-pil", .data = &wcss_sec_ipq9574_res_init },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, wcss_sec_of_match);
+
+static struct platform_driver wcss_sec_driver = {
+	.probe = wcss_sec_probe,
+	.remove = wcss_sec_remove,
+	.driver = {
+		.name = "qcom-wcss-secure-pil",
+		.of_match_table = wcss_sec_of_match,
+	},
+};
+module_platform_driver(wcss_sec_driver);
+
+MODULE_DESCRIPTION("Hexagon WCSS Secure Peripheral Image Loader");
+MODULE_LICENSE("GPL");