diff mbox series

[07/10] remoteproc: qcom_q6v5_mss: Drop redundant error printks in probe

Message ID 20241011-remote-proc-dev-err-probe-v1-7-5abb4fc61eca@linaro.org (mailing list archive)
State New
Headers show
Series remoteproc: few dev_err_probe() and other cleanups/improvements | expand

Commit Message

Krzysztof Kozlowski Oct. 11, 2024, 1:09 p.m. UTC 
Do not print errors of getting clocks and regulators in probe twice:
once in q6v5_init_clocks() or q6v5_regulator_init() and then again in the
probe function.  This also avoids dmesg flood on deferred probe.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 24 ++++++------------------
 1 file changed, 6 insertions(+), 18 deletions(-)

Comments

Dmitry Baryshkov Oct. 11, 2024, 1:35 p.m. UTC | #1 
On Fri, Oct 11, 2024 at 03:09:15PM +0200, Krzysztof Kozlowski wrote:
> Do not print errors of getting clocks and regulators in probe twice:
> once in q6v5_init_clocks() or q6v5_regulator_init() and then again in the
> probe function.  This also avoids dmesg flood on deferred probe.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/remoteproc/qcom_q6v5_mss.c | 24 ++++++------------------
>  1 file changed, 6 insertions(+), 18 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 92212892a53ea4843da62642c39413c33b4c962a..68b8172b023ee62be764ba69e07f3743ce6124e3 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -2020,42 +2020,32 @@  static int q6v5_probe(struct platform_device *pdev)
 
 	ret = q6v5_init_clocks(&pdev->dev, qproc->proxy_clks,
 			       desc->proxy_clk_names);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get proxy clocks.\n");
+	if (ret < 0)
 		return ret;
-	}
 	qproc->proxy_clk_count = ret;
 
 	ret = q6v5_init_clocks(&pdev->dev, qproc->reset_clks,
 			       desc->reset_clk_names);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get reset clocks.\n");
+	if (ret < 0)
 		return ret;
-	}
 	qproc->reset_clk_count = ret;
 
 	ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
 			       desc->active_clk_names);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get active clocks.\n");
+	if (ret < 0)
 		return ret;
-	}
 	qproc->active_clk_count = ret;
 
 	ret = q6v5_regulator_init(&pdev->dev, qproc->proxy_regs,
 				  desc->proxy_supply);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get proxy regulators.\n");
+	if (ret < 0)
 		return ret;
-	}
 	qproc->proxy_reg_count = ret;
 
 	ret = q6v5_regulator_init(&pdev->dev,  qproc->active_regs,
 				  desc->active_supply);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get active regulators.\n");
+	if (ret < 0)
 		return ret;
-	}
 	qproc->active_reg_count = ret;
 
 	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
@@ -2065,10 +2055,8 @@  static int q6v5_probe(struct platform_device *pdev)
 		ret = q6v5_regulator_init(&pdev->dev,
 					  qproc->fallback_proxy_regs,
 					  desc->fallback_proxy_supply);
-		if (ret < 0) {
-			dev_err(&pdev->dev, "Failed to get fallback proxy regulators.\n");
+		if (ret < 0)
 			return ret;
-		}
 		qproc->fallback_proxy_reg_count = ret;
 	} else if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to init power domains\n");