@@ -296,5 +296,19 @@ int k3_rproc_start(struct rproc *rproc)
}
EXPORT_SYMBOL_GPL(k3_rproc_start);
+/*
+ * Stop the remote processor.
+ *
+ * This function puts the remote processor into reset, and finishes processing
+ * of any pending messages. This callback is invoked only in remoteproc mode.
+ */
+int k3_rproc_stop(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+
+ return k3_rproc_reset(kproc);
+}
+EXPORT_SYMBOL_GPL(k3_rproc_stop);
+
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("TI K3 common Remoteproc code");
@@ -96,4 +96,5 @@ int k3_rproc_request_mbox(struct rproc *rproc);
int k3_rproc_prepare(struct rproc *rproc);
int k3_rproc_unprepare(struct rproc *rproc);
int k3_rproc_start(struct rproc *rproc);
+int k3_rproc_stop(struct rproc *rproc);
#endif /* REMOTEPROC_TI_K3_COMMON_H */
@@ -58,21 +58,6 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
return 0;
}
-/*
- * Stop the DSP remote processor.
- *
- * This function puts the DSP processor into reset, and finishes processing
- * of any pending messages. This callback is invoked only in remoteproc mode.
- */
-static int k3_dsp_rproc_stop(struct rproc *rproc)
-{
- struct k3_rproc *kproc = rproc->priv;
-
- k3_rproc_reset(kproc);
-
- return 0;
-}
-
/*
* Attach to a running DSP remote processor (IPC-only mode)
*
@@ -203,7 +188,7 @@ static void *k3_dsp_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool
static const struct rproc_ops k3_dsp_rproc_ops = {
.start = k3_dsp_rproc_start,
- .stop = k3_dsp_rproc_stop,
+ .stop = k3_rproc_stop,
.kick = k3_rproc_kick,
.da_to_va = k3_dsp_rproc_da_to_va,
};
@@ -429,7 +414,6 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
dev_info(dev, "configured DSP for IPC-only mode\n");
rproc->state = RPROC_DETACHED;
/* override rproc ops with only required IPC-only mode ops */
- rproc->ops->stop = NULL;
rproc->ops->attach = k3_dsp_rproc_attach;
rproc->ops->detach = k3_dsp_rproc_detach;
rproc->ops->get_loaded_rsc_table = k3_dsp_get_loaded_rsc_table;
@@ -244,19 +244,6 @@ static void k3_m4_release_tsp(void *data)
ti_sci_proc_release(tsp);
}
-/*
- * Stop the M4 remote processor.
- *
- * This function puts the M4 processor into reset, and finishes processing
- * of any pending messages. This callback is invoked only in remoteproc mode.
- */
-static int k3_m4_rproc_stop(struct rproc *rproc)
-{
- struct k3_rproc *kproc = rproc->priv;
-
- return k3_rproc_reset(kproc);
-}
-
/*
* Attach to a running M4 remote processor (IPC-only mode)
*
@@ -297,7 +284,7 @@ static const struct rproc_ops k3_m4_rproc_ops = {
.prepare = k3_rproc_prepare,
.unprepare = k3_rproc_unprepare,
.start = k3_rproc_start,
- .stop = k3_m4_rproc_stop,
+ .stop = k3_rproc_stop,
.attach = k3_m4_rproc_attach,
.detach = k3_m4_rproc_detach,
.kick = k3_rproc_kick,
The .stop rproc ops implementations in ti_k3_dsp_remoteproc.c and ti_k3_m4_remoteproc.c drivers put the remote processor into reset. Refactor the implementations into ti_k3_common.c driver as k3_rproc_stop() and align DSP and M4 drivers to register this common function as .stop ops. Further, do not override the .stop ops with NULL when operating in IPC-only mode in ti_k3_dsp_remoteproc.c, as .stop is never invoked in rproc_detach routine. Signed-off-by: Beleswar Padhi <b-padhi@ti.com> --- drivers/remoteproc/ti_k3_common.c | 14 ++++++++++++++ drivers/remoteproc/ti_k3_common.h | 1 + drivers/remoteproc/ti_k3_dsp_remoteproc.c | 18 +----------------- drivers/remoteproc/ti_k3_m4_remoteproc.c | 15 +-------------- 4 files changed, 17 insertions(+), 31 deletions(-)