[v2,0/3] clk: renesas: r7s9210: Add support for early clocks

Message

Chris Brandt Sept. 24, 2018, 4:49 p.m. UTC

The OSTM timer driver for RZ/A2 uses TIMER_OF_DECLARE which requires the
ostm module clocks to be registers early in boot.

This series add early clock support to cpg-mssr

Here are some notes I took:

 * Switched to using
     of_iomap(cpg_np, 0)
   instead of
     platform_get_resource(pdev, IORESOURCE_MEM, 0)

*  All devm_xxx calls were replaced with the traditinal functions because
   'dev' is not available for early probe

*  some functions are still using dev_dbg and dev_err for messages, but
   in early init, dev is set to NULL so it doesn't crash, the messages
   just look like this:
      (NULL device *): Core clock extal at 24000000 Hz
      (NULL device *): clock (1, 35) is ostm1 at 66000000 Hz

*  np was added to priv
   np is saved because dev->of_node doesn't exist during early init and we
   need to avoid using 'dev' for any function that will run during early
   init

*  all .init functions (r8xxxx_cpg_mssr_init) for the SoCs do not use dev,
   except for r8a7791_cpg_mssr_init for the lines:
       struct device_node *np = dev->of_node;
       of_device_is_compatible(np, "renesas,r8a7793-cpg-mssr")
    But, so if early clock support was every needed for r8a7791 or r8a7793,
    that line will need to be changed.

* In r7s9210-cpg-mssr.c, I moved updating the clock ratio table to a
  separate function (r7s9210_update_table) because it looks cleaner.

Chris Brandt (3):
  clk: renesas: cpg-mssr: Add early clock support
  clk: renesas: r7s9210: Convert some clocks to early
  clk: renesas: r7s9210: Move table update to separate function

 drivers/clk/renesas/r7s9210-cpg-mssr.c | 126 ++++++++++++++++++++-------------
 drivers/clk/renesas/renesas-cpg-mssr.c |  95 +++++++++++++++++++------
 drivers/clk/renesas/renesas-cpg-mssr.h |  13 ++++
 3 files changed, 163 insertions(+), 71 deletions(-)