mbox series

[v2,0/3] iWave G21D-Q7 enable flash, CAN and SD2 LED

Message ID 20200907155541.2011-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
Headers show
Series iWave G21D-Q7 enable flash, CAN and SD2 LED | expand

Message

Lad Prabhakar Sept. 7, 2020, 3:55 p.m. UTC
Hi All,

This patch series enables PCIe, SPI NOR flash, CAN0 and SD2 LED indication
on iWave G21D-Q7 board.

Patches apply on top of [1] and also dependent on patch [2]
[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/
    renesas-devel.git/log/?h=renesas-arm-dt-for-v5.10
[2] https://patchwork.kernel.org/patch/11712541/

Cheers,
Prabhakar

v1->v2
* Set SD2 LED trigger GPIO as GPIO_ACTIVE_HIGH
* Added missing "msiof0_sync" in msiof0 pins
* Corrected to can1 interface on carrier board

Lad Prabhakar (3):
  ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR support
  ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier board
  ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indication

 arch/arm/boot/dts/r8a7742-iwg21d-q7.dts | 62 +++++++++++++++++++++++++
 1 file changed, 62 insertions(+)