mbox series

[0/4] arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle

Message ID 20210215172447.2026514-1-jacopo+renesas@jmondi.org (mailing list archive)
Headers show
Series arm64: dts: renesas: Enable GMSL on R8A77970 V3M Eagle | expand


Jacopo Mondi Feb. 15, 2021, 5:24 p.m. UTC
   this series adds a .dtsi fragment that allow to describe and
enable GMSL cameras on the V3M Eagle board.

The .dtsi supports connecting the RDACM20 and RDACM21 cameras to the
FAKRA connectors installed on the board.

Tested on V3M Eagle with RDACM20 and RDACM21 (a series is pending submission
for the RDACM20 camera module to support operations on the Eagle board)


Jacopo Mondi (1):
  dt-bindings: media: max9286: Describe gpio-hog

Kieran Bingham (3):
  arm64: dts: renesas: eagle: Enable MAX9286
  arm64: dts: renesas: eagle: Add GMSL .dtsi
  arm64: dts: renesas: eagle: Include eagle-gmsl

 .../bindings/media/i2c/maxim,max9286.yaml     |   9 +
 arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi   | 186 ++++++++++++++++++
 .../arm64/boot/dts/renesas/r8a77970-eagle.dts | 135 +++++++++++++
 3 files changed, 330 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/eagle-gmsl.dtsi