mbox series

[v2,0/3] SoC identification support for RZ/G2L

Message ID 20210609163717.3083-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
Headers show
Series SoC identification support for RZ/G2L | expand

Message

Lad Prabhakar June 9, 2021, 4:37 p.m. UTC
Hi All,

This patch series adds support for RZ/G2{L,LC} SoC
identification.

SoC identification register is part of SYSC block and
currently no driver is added for SYSC block so just the
basic properties are added in binding documentation (and will
updated with the required properties once the driver is in
place) and this node is used in renesas-soc.c for SoC
identification.

Patches are based on top of [1] master branch and is dependent on
patch series [2].

[1] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/
[2] https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=497355

Changes for v2:
* Added description for multiple interrupts in SYSC binding doc
* Added interrupt-names property in SYSC binding doc
* Update dtsi to included interrupt-names property for SYSC node
* Mapped entire SYSC block to read the device id
* Included RB tag for patch 1, 3

Cheers,
Prabhakar

Lad Prabhakar (3):
  dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation
    for SYSC controller
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC}
    SoC's
  arm64: dts: renesas: r9a07g044: Add SYSC node to RZ/G2L SoC DTSI

 .../bindings/power/renesas,rzg2l-sysc.yaml    | 63 +++++++++++++++++++
 arch/arm64/boot/dts/renesas/r9a07g044.dtsi    | 12 ++++
 drivers/soc/renesas/renesas-soc.c             | 33 +++++++++-
 3 files changed, 107 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/power/renesas,rzg2l-sysc.yaml