[v6,0/3] Add USB2.0 support

Message

Biju Das Aug. 12, 2021, 3:18 p.m. UTC

This patch series aims to add USB2.0 Host and device support for RZ/G2L SoC.

This patch series is based on renesas-devel.

v5->v6:
 * Updated phyrst node with status disabled
 * Added Geert's Rb tag for SoC dtsi patches
 * Sorted defconfig patch alphabetically.
 * Removed USB2.0 phy driver/binding patches as it is accepted for phy/next
 * Removed USBHS binding patches as it is accepted for usb/next.
v4->v5:
 * Removed USBPHY control and binding patches as it is accepted for reset/next
 * Removed USB ehci/ohci binding patches as it is accepted for usb/next.
 * Updated Renesas USB2.0 PHY bindings to just use 'resets' as required.
 * Added interrupts maxitems=1 for SoC other than RZ/G2L for Renesas USBHS bindings
 * Updated the commit description for USB2.0 PHY driver patch.

v3->v4:
 * Added Rob's Acked-by tag for generic-{ohci,ehci} binding patch
 * Added Rob's Rb tag for RZ/G2L USBPHY control binding patch
 * Incorporated Phillip's review comments for USBPHY control driver.
 * Dropped second reset from usb2-phy binding patch
 * Added maxitems as per Rob's review comment.

v2->v3
 * USBPHY Control IP modelled as reset bindings as per Rob's suggestion
 * Updated the binding patches
 * Incorporated Geert's and Shimoda-San's review comment for phy driver patch.

v1->v2
 * Updated usb phy control bindings with clock definitions
 * Updated generic ohci/ehci bindings to support RZ/G2L SoC
 * Incorporated vinod's review comment on usb phy control driver
 * Add support for USB2.0 device and OTG support.

Biju Das (3):
  arm64: defconfig: Enable RZ/G2L USBPHY control driver
  arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support
  arm64: dts: renesas: r9a07g044: Add USB2.0 device support

 arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 114 +++++++++++++++++++++
 arch/arm64/configs/defconfig               |   1 +
 2 files changed, 115 insertions(+)