mbox series

[v5,0/4] Renesas RZ/N1 NAND controller support

Message ID 20211217090248.259122-1-miquel.raynal@bootlin.com (mailing list archive)
Headers show
Series Renesas RZ/N1 NAND controller support | expand

Message

Miquel Raynal Dec. 17, 2021, 9:02 a.m. UTC
Hello,

Here is a short series bringing support for Renesas RZ/N1 NAND
controller.

This time the driver has been tested with a fully-upstream device tree
on top of a v5.16-rc4. The DT used is very close to the r9a06g032-db.

Cheers,
Miquèl

Changes in v5:
* Add Rob's ack on the bindings.
* Dropped the #address/size-cells properties (handled by nand-controller.yaml).
* Fixed a typo reported by the kernel test robot (when building as a module).

Changes in v4:
* Set unevaluatedProperties set to false in the bindings.
* Change the clock names by removing the nand_ prefix which is
  redundant, even though the clocks are named like this in the spec. The
  name remains clear enough anyway.

Changes in v3:
* Rebased on top of a fully-upstream recent kernel.
* Renamed the clocks in the bindings and the driver to match the
  documentation (lower-cased): nand_hclk & nand_eclk.
* Added a new commit describing the NAND controller in the r9a06g032
  DTSI.
* Added the Reviewed-by and Tested-by tags received.

Changes in v2:
* Added the family-specific rzn1 compatible as suggested by Geert.
  Updated the bindings, the binding file name, the compatible used in
  the driver, the MAINTAINERS entry, etc.
* Added an ARCH_RENESAS Kconfig dependency.
* Changed the type (to unsigned) of a couple of variables.
* Returned earlier when possible to reduce indentation.
* Used platform_get_irq_optional() instead of platform_get_irq() to avoid
  a useless warning.
* Handled probe deferral correctly.
* Applied a massive s/nfc/nandc/ as suggested by Geert to avoid
  confusions with the near-field-communication device.
* Mentioned Evatronix as original authors of the IP in the commit log and
  in the header.
* Added an additional check on the validity of the child nodes reg property.
* A couple of style fixes.

Miquel Raynal (4):
  dt-bindings: mtd: rzn1: Describe Renesas RZ/N1 NAND controller
  mtd: rawnand: rzn1: Add new NAND controller driver
  MAINTAINERS: Add an entry for Renesas RZ/N1 NAND controller
  ARM: dts: r9a06g032: Describe NAND controller

 .../mtd/renesas,rzn1-nand-controller.yaml     |   61 +
 MAINTAINERS                                   |    7 +
 arch/arm/boot/dts/r9a06g032.dtsi              |   12 +
 drivers/mtd/nand/raw/Kconfig                  |    6 +
 drivers/mtd/nand/raw/Makefile                 |    1 +
 drivers/mtd/nand/raw/rzn1-nand-controller.c   | 1422 +++++++++++++++++
 6 files changed, 1509 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/renesas,rzn1-nand-controller.yaml
 create mode 100644 drivers/mtd/nand/raw/rzn1-nand-controller.c