| Message ID | 20241218001618.488946-1-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for I2C bus recovery for riic driver | expand |
> This patch series introduces support for I2C bus recovery in the RIIC > driver, which is utilized in RZ series SoCs. The addition of bus recovery > functionality enhances the reliability of the I2C interface by allowing it > to recover from error conditions that might leave the bus in an unusable > state. > > Alongside the bus recovery implementation, the series includes several > cleanup and improvement patches that simplify and modernize the driver > code. These include replacing `dev_err` calls with `dev_err_probe`, > consistent usage of the `BIT` and `GENMASK` macros, leveraging devres > helpers for reset management, and improving code readability by marking > static data as `const`. I am planning to review and test this series later today.
On Fri, Dec 20, 2024 at 01:02:51PM +0100, Wolfram Sang wrote: > > > This patch series introduces support for I2C bus recovery in the RIIC > > driver, which is utilized in RZ series SoCs. The addition of bus recovery > > functionality enhances the reliability of the I2C interface by allowing it > > to recover from error conditions that might leave the bus in an unusable > > state. > > > > Alongside the bus recovery implementation, the series includes several > > cleanup and improvement patches that simplify and modernize the driver > > code. These include replacing `dev_err` calls with `dev_err_probe`, > > consistent usage of the `BIT` and `GENMASK` macros, leveraging devres > > helpers for reset management, and improving code readability by marking > > static data as `const`. > > I am planning to review and test this series later today. Thanks for this series! Regarding the cleanups, rhe driver is indeed in a better shape afterwards. Good work. Patch 9 still needs discussion but for patches 1-8: Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> On a RZ/G3S, doing bus scans and some transfers with checksumming.
Hi, Prabhakar, On 18.12.2024 02:16, Prabhakar wrote: > Lad Prabhakar (9): > i2c: riic: Replace dev_err with dev_err_probe in probe function > i2c: riic: Use local `dev` pointer in `dev_err_probe()` > i2c: riic: Use BIT macro consistently > i2c: riic: Use GENMASK() macro for bitmask definitions > i2c: riic: Make use of devres helper to request deasserted reset line > i2c: riic: Mark riic_irqs array as const > i2c: riic: Use predefined macro and simplify clock tick calculation > i2c: riic: Add `riic_bus_barrier()` to check bus availability > i2c: riic: Implement bus recovery I've tested this series on RZ/G3S checking the already enabled functionalities and suspend to RAM. All good. Please add: Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Thank you, Claudiu
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Hi All, This patch series introduces support for I2C bus recovery in the RIIC driver, which is utilized in RZ series SoCs. The addition of bus recovery functionality enhances the reliability of the I2C interface by allowing it to recover from error conditions that might leave the bus in an unusable state. Alongside the bus recovery implementation, the series includes several cleanup and improvement patches that simplify and modernize the driver code. These include replacing `dev_err` calls with `dev_err_probe`, consistent usage of the `BIT` and `GENMASK` macros, leveraging devres helpers for reset management, and improving code readability by marking static data as `const`. v1->v2 - Fixed review comments and collected RB tags from Geert v1: https://lore.kernel.org/all/20241213175828.909987-1-prabhakar.mahadev-lad.rj@bp.renesas.com/ Cheers, Prabhakar Lad Prabhakar (9): i2c: riic: Replace dev_err with dev_err_probe in probe function i2c: riic: Use local `dev` pointer in `dev_err_probe()` i2c: riic: Use BIT macro consistently i2c: riic: Use GENMASK() macro for bitmask definitions i2c: riic: Make use of devres helper to request deasserted reset line i2c: riic: Mark riic_irqs array as const i2c: riic: Use predefined macro and simplify clock tick calculation i2c: riic: Add `riic_bus_barrier()` to check bus availability i2c: riic: Implement bus recovery drivers/i2c/busses/i2c-riic.c | 222 ++++++++++++++++++++++++---------- 1 file changed, 155 insertions(+), 67 deletions(-)