mbox series

[v2,0/4] Add support Yuridenki-Shokai Kakip board

Message ID 20250116144752.1738574-1-iwamatsu@nigauri.org (mailing list archive)
Headers show
Series Add support Yuridenki-Shokai Kakip board | expand

Message

Nobuhiro Iwamatsu Jan. 16, 2025, 2:47 p.m. UTC 
Hi all,

This patch series add basic support for Yuridenki-Shokai[0] Kakip board[1] based
on R9A09G057H48.
And this series supports the following:

  - Memory
  - Input clocks
  - Pin Control
  - SCIF
  - OSTM0 - OSTM7
  - SDHI0

v2:
  - Fix the rule of binding for boards.
    kakip board uses r9a09g057h48 only.
  - Drop bootargs from chosen.
  - Fix binding name for regulators.
  - Fix the name style of the regulator.
  - Use DTS coding style.

Best regatrds,
  Nobuhiro

[0]: https://www.yuridenki.co.jp/
[1]: https://www.kakip.ai/

Nobuhiro Iwamatsu (4):
  dt-bindings: soc: renesas: Document Renesas RZ/V2H SoC variants
  dt-bindings: vendor-prefixes: Add Yuridenki-Shokai Co. Ltd.
  dt-bindings: soc: renesas: Document Yuridenki-Shokai Kakip board
  arm64: dts: renesas: Add initial device tree for Yuridenki-Shokai
    Kakip board

 .../bindings/soc/renesas/renesas.yaml         |   9 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 .../boot/dts/renesas/r9a09g057h48-kakip.dts   | 136 ++++++++++++++++++
 4 files changed, 148 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts