mbox series

[v3,0/2] Add basic support for MYIR Remi Pi

Message ID 20250131-myir-remi-pi-v3-0-2dda53e79291@collabora.com (mailing list archive)
Headers show
Series Add basic support for MYIR Remi Pi | expand

Message

Julien Massot Jan. 31, 2025, 9:57 a.m. UTC 
The Remi Pi is a compact board based on the Renesas RZ/G2L SoC.

This initial patchset add support for basic functions:
     - UART
     - I2C
     - HDMI
     - Ethernet

More work is needed to support the remaining functions such as
USB Type C, SD card, Audio, Wi-Fi and Bluetooth.

Some schematics are available at https://down.myir-tech.com/RemiPi/

Signed-off-by: Julien Massot <julien.massot@collabora.com>
---
Changes in v3:
- Use 'MYIR' spelling consistently
- Removed: scif1, and scif2 nodes, and enable scif4
- Changed regulator-1p8v vin-supply to reg_5p0v
- Added 'reset-gpios' for boh ethernet phys
- Dropped unused 'spi0' pinctrl
- Removed 'sdhi0_pins_uhs' duplicated pinctrl
- Removed 'usb1_pins' they are not mentionned in the schematics
- Sort all the references to nodes alphabetically
- Link to v2: https://lore.kernel.org/r/20250127-myir-remi-pi-v2-0-7bd3a1c62752@collabora.com

Changes in v2:
- Reorder Makefile entry to be sorted
- Remove underscore from DT nodes names
- Fix compatible for ethernet nodes and remove uneeded properties
- Remove uneeded x1-clock
- Link to v1: https://lore.kernel.org/r/20250122-myir-remi-pi-v1-0-0e44e1cb8a90@collabora.com

---
Julien Massot (2):
      dt-bindings: soc: renesas: Document MYIR Remi Pi board
      arm64: renesas: add initial support for MYIR Remi Pi

 .../devicetree/bindings/soc/renesas/renesas.yaml   |   7 +
 arch/arm64/boot/dts/renesas/Makefile               |   1 +
 .../arm64/boot/dts/renesas/r9a07g044l2-remi-pi.dts | 351 +++++++++++++++++++++
 3 files changed, 359 insertions(+)
---
base-commit: c4b9570cfb63501638db720f3bee9f6dfd044b82
change-id: 20250122-myir-remi-pi-94d6055f5879

Best regards,