[v5,00/12] Add Support for RZ/G3E ICU

Message

Biju Das Feb. 12, 2025, 11:12 a.m. UTC

The ICU block on the RZ/G3E SoC is almost identical to the one found on
the RZ/V2H SoC, with the following differences:
 - The TINT register base offset is 0x800 instead of zero.
 - The number of supported GPIO interrupts for TINT selection is 141
   instead of 86.
 - The pin index and TINT selection index are not in the 1:1 map
 - The number of TSSR registers is 16 instead of 8
 - Each TSSR register can program 2 TINTs instead of 4 TINTs

Add support for the RZ/G3E ICU driver.

Note:
  The SoC dtsi patch is dropped from series as it is queued for
  renesas-devel.

v4->v5:
 * Collected tags from Geert.
 * Added a new patch for fixing wrong variable usage in
   rzv2h_tint_set_type().
 * Shortened tssr calculation in rzv2h_tint_irq_endisable().
 * Added tssr_shift_factor variable for optimizing the calculation
   in rzv2h_tint_set_type().
 * Dropped unnecessary parenthesis for calculating tssr in
   rzv2h_tint_set_type().
v3->v4:
 * Updated typo in commit description register offset->register
   base offset.
 * Update typo 15->16 for the number of TSSR registers in RZ/G3E
 * Collected tags.
 * Fixed the typo varable->variable.
 * Started using field_width to handle the SoC differences ad dropped the
   variables tien, tssel_mask,tssel_shift and tssr_k.
 * Dropped RZG3E_* macros from SoC dtsi.
v2->v3:
 * Added a new patch for cleanup using devm_add_action_or_reset() for
   calling put_device() in error path of rzv2h_icu_init() to simplify
   the code by using recently added devm_*helpers.
 * Replaced 'goto put_dev' by 'return xxx' as put_dev() called by
   devm_add_action_or_reset()
v1->v2:
 * Collected tags
 * Split the simplification patch into two.
 * Updated commit header and description for patch#4.
 * Replaced devm_reset_control_get_optional_exclusive_deasserted()->
   devm_reset_control_get_exclusive_deasserted().
 * Moved simplification using devm_pm_runtime_enable() to patch#5.
 * Aligned kernel doc, struct members and struct initializers in
   a tabular fashion.
 * Renamed the macro ICU_PB5_TINT->ICU_RZV2H_TSSEL_MAX_VAL.
 * Replaced hexa decimal constant with ICU_RZV2H_TSSEL_MAX_VAL in struct
   rzv2h_hw_params.
 * Introduced ICU_RZG3E_{TSSEL_MAX_VAL,TINT_OFFSET} macros and used these
   macros in struct rzv2h_hw_params rather than using the hex constants.

Biju Das (12):
  dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E
    SoC
  irqchip/renesas-rzv2h: Fix wrong variable usage in
    rzv2h_tint_set_type()
  irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
  irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
  irqchip/renesas-rzv2h: Use
    devm_reset_control_get_exclusive_deasserted()
  irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
  irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
  irqchip/renesas-rzv2h: Add max_tssel variable to struct rzv2h_hw_info
  irqchip/renesas-rzv2h: Add field_width variable to struct
    rzv2h_hw_info
  irqchip/renesas-rzv2h: Drop TSSR_TIEN macro
  irqchip/renesas-rzv2h: Drop macros ICU_TSSR_TSSEL_{MASK,PREP}
  irqchip/renesas-rzv2h: Add RZ/G3E support

 .../renesas,rzv2h-icu.yaml                    |   6 +-
 drivers/irqchip/irq-renesas-rzv2h.c           | 189 ++++++++++++------
 2 files changed, 133 insertions(+), 62 deletions(-)