mbox series

[v2,0/3] Enable CANFD and CAN Transceiver

Message ID 20250320164121.193857-1-biju.das.jz@bp.renesas.com (mailing list archive)
Headers show
Series Enable CANFD and CAN Transceiver | expand

Message

Biju Das March 20, 2025, 4:41 p.m. UTC 
RZ/G3E SMARC EVK has 2 CANFD connectors connected to TCAN1046V-Q1
Transceiver that is connected to channel1 and channel4 on the SoC.
Enable CANFD and CAN Transceiver

v1->v2:
 * Make it as separate series
 * Replaced integer with hexadecimal for module clock and reset numbers.
 * Defined the macros SW_LCD_EN and SW_PDM_EN  which routes signals to
   CAN0 and CAN1 based on SYS.5 and BOOT.6 switches.
 * Replaced GPIO hog with CAN Transceiver.

Biju Das (3):
  arm64: dts: renesas: r9a09g047: Add CANFD node
  arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD
  arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN Transceiver

 arch/arm64/boot/dts/renesas/r9a09g047.dtsi    | 60 +++++++++++++++++++
 .../boot/dts/renesas/r9a09g047e57-smarc.dts   | 53 ++++++++++++++++
 .../boot/dts/renesas/renesas-smarc2.dtsi      | 29 +++++++++
 .../boot/dts/renesas/rzg3e-smarc-som.dtsi     | 14 ++++-
 4 files changed, 153 insertions(+), 3 deletions(-)