[v3,0/4] arm64: dts: renesas: Add R-Car S4 Starter Kit support

Message

Kuninori Morimoto Oct. 2, 2023, 5:54 a.m. UTC

Hi Geert

This patch-set is v3 of R-Car S4 Starter Kit support.
It needs Rswitch bug fix patch [1] which was posted to Ether ML.
I hope it will be accepted for v6.6 Kernel.

[1] Link: https://lore.kernel.org/r/[e-mail]

S4 Starter Kit is possible to setup details via config exe,
but the DT will be more complex. This DT is assuming "default" settings
to avoid confusion.

R-Car S4 Starter Kit is using new R8A779F4 SoC which is updated version
of R8A779F0. This patch adds new r8a779f4.dtsi file but is using existing
r8a779f0.dtsi internally.

v2 -> v3
	- alphabetical order on pfc
	- use "OR" on dts SPDX
	- remove UHS from mmc
	- remove unused "sd_pins" from pfc
	- add Co-developed-by:
	- add interrupt on rswitch
	- fixup node name on rswitch
	- re-add "st,24c16" on eeprom
	- add "renesas,r8a779f0" on compatible
	- fix typo "s/r8a77f4/r8a779f4/ on dtsi

v1 -> v2
	- correct board name
	- removed BSP specific device
	- alphabetical order
	- add missing compatibles
	- add new r8a779f4.dtsi


Kuninori Morimoto (4):
  dt-bindings: irqchip: renesas,irqc: Add r8a779f0 support
  dt-bindings: soc: renesas: renesas.yaml: Add renesas,s4sk compatible
  arm64: dts: renesas: Add Renesas R8A779F4 SoC support
  arm64: dts: renesas: Add R-Car S4 Starter Kit support

 .../interrupt-controller/renesas,irqc.yaml    |   1 +
 .../bindings/soc/renesas/renesas.yaml         |   7 +
 arch/arm64/boot/dts/renesas/Makefile          |   1 +
 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts | 240 ++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779f4.dtsi     |  12 +
 5 files changed, 261 insertions(+)
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4-s4sk.dts
 create mode 100644 arch/arm64/boot/dts/renesas/r8a779f4.dtsi