mbox series

[v3,0/2] arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes

Message ID cover.1666361314.git.geert+renesas@glider.be (mailing list archive)
Headers show
Series arm64: dts: renesas: r8a779g0: Add remaining (H)SCIF nodes | expand

Message

Geert Uytterhoeven Oct. 21, 2022, 2:13 p.m. UTC 
Hi all,

This patch series adds devices nodes for the remaining Serial and High
Speed Serial Communication Interfaces with FIFO ((H)SCIF) on the Renesas
R-Car V4H (R8A779G0) SoC.

Changes compared to v2[1]:
  - Correct SCIF register block size.

Changes compared to v1[2]:
  - Replace S0D3_PER by SASYNCPERD1, as per R-Car V4H Hardware User's
    Manual rev. 0.54.

SCIF[134] and HSCIF[13] can be accessed on expansion connectors on the
White Hawk BreatOut Board using DT overlays available from [3].  They
have been tested with a logic analyzer (to verify clocking) and with
external loopback.

I plan to queues this series in renesas-devel for v6.2.
Thanks for your comments!

[1] https://lore.kernel.org/r/cover.1665156023.git.geert+renesas@glider.be
[2] https://lore.kernel.org/r/cover.1665065132.git.geert+renesas@glider.be
[3] https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/log/?h=topic/renesas-overlays


Geert Uytterhoeven (2):
  arm64: dts: renesas: r8a779g0: Add SCIF nodes
  arm64: dts: renesas: r8a779g0: Add remaining HSCIF nodes

 arch/arm64/boot/dts/renesas/r8a779g0.dtsi | 124 +++++++++++++++++++++-
 1 file changed, 121 insertions(+), 3 deletions(-)