| Message ID | 0c5f06c9d262c1720b40d068b6eefe58ca406601.1638539806.git.geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | 644291ebecd1355363f4b7a39dc115828643b901 |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | [v2] dt-bindings: input: touchscreen: ilitek_ts_i2c: Absorb ili2xxx bindings | expand |
On Fri, 03 Dec 2021 14:58:26 +0100, Geert Uytterhoeven wrote: > While Linux uses a different driver, the Ilitek > ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree > binding documentation is very similar. > > - Drop the fixed reg value, as some controllers use a different > address, > - Make reset-gpios optional, as it is not always wired. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > v2: > - Add Reviewed-by. > --- > .../bindings/input/ilitek,ili2xxx.txt | 27 ------------------- > .../input/touchscreen/ilitek_ts_i2c.yaml | 7 +++-- > 2 files changed, 5 insertions(+), 29 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt b/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt deleted file mode 100644 index cdcaa3f52d253670..0000000000000000 --- a/Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt +++ /dev/null @@ -1,27 +0,0 @@ -Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller - -Required properties: -- compatible: - ilitek,ili210x for ILI210x - ilitek,ili2117 for ILI2117 - ilitek,ili2120 for ILI2120 - ilitek,ili251x for ILI251x - -- reg: The I2C address of the device - -- interrupts: The sink for the touchscreen's IRQ output - See ../interrupt-controller/interrupts.txt - -Optional properties for main touchpad device: - -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) - -Example: - - touchscreen@41 { - compatible = "ilitek,ili251x"; - reg = <0x41>; - interrupt-parent = <&gpio4>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml index a190e7baac3162a3..9f732899975683a8 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -15,6 +15,9 @@ allOf: properties: compatible: enum: + - ilitek,ili210x + - ilitek,ili2117 + - ilitek,ili2120 - ilitek,ili2130 - ilitek,ili2131 - ilitek,ili2132 @@ -22,11 +25,12 @@ properties: - ilitek,ili2322 - ilitek,ili2323 - ilitek,ili2326 + - ilitek,ili251x - ilitek,ili2520 - ilitek,ili2521 reg: - const: 0x41 + maxItems: 1 interrupts: maxItems: 1 @@ -50,7 +54,6 @@ required: - compatible - reg - interrupts - - reset-gpios examples: - |
While Linux uses a different driver, the Ilitek ILI210x/ILI2117/ILI2120/ILI251x touchscreen controller Device Tree binding documentation is very similar. - Drop the fixed reg value, as some controllers use a different address, - Make reset-gpios optional, as it is not always wired. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> --- v2: - Add Reviewed-by. --- .../bindings/input/ilitek,ili2xxx.txt | 27 ------------------- .../input/touchscreen/ilitek_ts_i2c.yaml | 7 +++-- 2 files changed, 5 insertions(+), 29 deletions(-) delete mode 100644 Documentation/devicetree/bindings/input/ilitek,ili2xxx.txt