@@ -52,6 +52,7 @@
voltage-tolerance = <1>; /* 1% */
clocks = <&cpg_clocks R8A7790_CLK_Z>;
clock-latency = <300000>; /* 300 us */
+ next-level-cache = <&L2_CA15>;
/* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>,
@@ -67,6 +68,7 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu2: cpu@2 {
@@ -74,6 +76,7 @@
compatible = "arm,cortex-a15";
reg = <2>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu3: cpu@3 {
@@ -81,6 +84,7 @@
compatible = "arm,cortex-a15";
reg = <3>;
clock-frequency = <1300000000>;
+ next-level-cache = <&L2_CA15>;
};
cpu4: cpu@4 {
@@ -88,6 +92,7 @@
compatible = "arm,cortex-a7";
reg = <0x100>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu5: cpu@5 {
@@ -95,6 +100,7 @@
compatible = "arm,cortex-a7";
reg = <0x101>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu6: cpu@6 {
@@ -102,6 +108,7 @@
compatible = "arm,cortex-a7";
reg = <0x102>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
cpu7: cpu@7 {
@@ -109,9 +116,22 @@
compatible = "arm,cortex-a7";
reg = <0x103>;
clock-frequency = <780000000>;
+ next-level-cache = <&L2_CA7>;
};
};
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller@1 {
+ compatible = "cache";
+ cache-unified;
+ cache-level = <2>;
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
Add device nodes for the L2 caches, and link the CPU nodes to them. The L2 cache for the Cortex-A15 CPU cores is 2 MiB large (organized as 128 KiB x 16 ways). The L2 cache for the Cortex-A7 CPU cores is 512 KiB large (organized as 64 KiB x 8 ways). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v3: - Drop "arm,data-latency" and "arm,tag-latency" properties, as they may not be valid when using virtualization, - Change one-line summary prefix to match current arm-soc practices, v2: - Drop (incorrect) optional cache-{size,sets,{block,line}-size} properties, as this information is auto-detected, - Integrate linking CPUs to L2 caches into this patch, - Extracted from series "[PATCH/RFC 00/15] ARM: shmobile: R-Car: Add SYSC PM Domain DT Support". --- arch/arm/boot/dts/r8a7790.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)