diff mbox

ARM: multi_v7_defconfig: enable I2C demultiplexer and slave eeprom

Message ID 1456308091-2714-1-git-send-email-wsa@the-dreams.de (mailing list archive)
State Accepted
Commit 651435d68253b0a5059175e2f113528080e5928e
Headers show

Commit Message

Wolfram Sang Feb. 24, 2016, 10:01 a.m. UTC 
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

The Renesas Lager board shall be a reference platform for the runtime
I2C IP core switcher and for I2C slave support. Enable the needed
drivers for this.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 arch/arm/configs/multi_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)

Comments

Simon Horman Feb. 25, 2016, 12:02 a.m. UTC | #1 
On Wed, Feb 24, 2016 at 11:01:31AM +0100, Wolfram Sang wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> The Renesas Lager board shall be a reference platform for the runtime
> I2C IP core switcher and for I2C slave support. Enable the needed
> drivers for this.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Thanks, I have queued this up for v4.7.
diff mbox

Patch

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 24ceac275c6a67..31a281a88a808f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -317,6 +317,7 @@  CONFIG_I2C_MUX=y
 CONFIG_I2C_ARB_GPIO_CHALLENGE=m
 CONFIG_I2C_MUX_PCA954x=y
 CONFIG_I2C_MUX_PINCTRL=y
+CONFIG_I2C_DEMUX_PINCTRL=y
 CONFIG_I2C_AT91=m
 CONFIG_I2C_CADENCE=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
@@ -339,6 +340,7 @@  CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_XILINX=y
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=m
+CONFIG_I2C_SLAVE_EEPROM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=m
 CONFIG_SPI_CADENCE=y