| Message ID | 1456886237-29936-3-git-send-email-horms+renesas@verge.net.au (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
On Wed, Mar 2, 2016 at 3:37 AM, Simon Horman <horms+renesas@verge.net.au> wrote: > In the case of Renesas R-Car hardware we know that there are generations of > SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the > relationship between IP blocks might be. For example, I believe that > r8a7790 is older than r8a7791 but that doesn't imply that the latter is a > descendant of the former or vice versa. > > We can, however, by examining the documentation and behaviour of the > hardware at run-time observe that the current driver implementation appears > to be compatible with the IP blocks on SoCs within a given generation. > > For the above reasons and convenience when enabling new SoCs a > per-generation fallback compatibility string scheme being adopted for > drivers for Renesas SoCs. > > Signed-off-by: Simon Horman <horms+renesas@verge.net.au> > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > @@ -6,6 +6,12 @@ This file provides information on what the device node for the R-Car generation > Required properties: > - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 > SoC. > + "renesas,usb2-phy-gen3" for a generic R-Car Gen3 compatible device. "renesas,rcar-gen3-usb2-phy"? Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index 2390e4e9c84c..1da9bb978824 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -6,6 +6,12 @@ This file provides information on what the device node for the R-Car generation Required properties: - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795 SoC. + "renesas,usb2-phy-gen3" for a generic R-Car Gen3 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: offset and length of the partial USB 2.0 Host register block. - reg-names: must be "usb2_host". - clocks: clock phandle and specifier pair(s). @@ -23,7 +29,7 @@ peripheral at that channel: Example (R-Car H3): usb-phy@ee080200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795","renesas,usb2-phy-gen3"; reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>; reg-names = "usb2_host", "hsusb"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; @@ -32,7 +38,7 @@ Example (R-Car H3): }; usb-phy@ee0a0200 { - compatible = "renesas,usb2-phy-r8a7795"; + compatible = "renesas,usb2-phy-r8a7795","renesas,usb2-phy-gen3"; reg = <0 0xee0a0200 0 0x700>; reg-names = "usb2_host"; clocks = <&mstp7_clks R8A7795_CLK_EHCI0>; diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c index ef332ef4abc7..ddd171814d36 100644 --- a/drivers/phy/phy-rcar-gen3-usb2.c +++ b/drivers/phy/phy-rcar-gen3-usb2.c @@ -303,6 +303,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch) static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = { { .compatible = "renesas,usb2-phy-r8a7795" }, + { .compatible = "renesas,usb2-phy-gen3" }, { } }; MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
In the case of Renesas R-Car hardware we know that there are generations of SoCs, e.g. Gen 2 and Gen 3. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme being adopted for drivers for Renesas SoCs. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 10 ++++++++-- drivers/phy/phy-rcar-gen3-usb2.c | 1 + 2 files changed, 9 insertions(+), 2 deletions(-)