diff mbox

[28/30] ARM: dts: r8a7794: Reference both DMA controllers in QSPI node

Message ID 1457609782-24108-29-git-send-email-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Niklas Söderlund March 10, 2016, 11:36 a.m. UTC
R-Car Gen2 have two DMA controllers, which are equivalent. Add
references to both dmac0 and dmac1 so the driver can fallback to the
later if the first one is unavailable.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 arch/arm/boot/dts/r8a7794.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 325ba88..23617a0 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -644,8 +644,9 @@ 
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
-		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
-		dma-names = "tx", "rx";
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+		       <&dmac1 0x17>, <&dmac1 0x18>;
+		dma-names = "tx", "rx", "tx", "rx";
 		power-domains = <&cpg_clocks>;
 		num-cs = <1>;
 		#address-cells = <1>;