[v2,15/23] ARM: dts: koelsch: Fix W=1 dtc warnings

Commit Message

Geert Uytterhoeven May 20, 2016, 7:10 a.m. UTC

Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@4 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /regulator@5 has a unit name, but no reg property

Signed-off-by: Geert Uytterhoeven <[e-mail]>
---
v2:
  - No changes.
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index da59c2844b8ad1c3..20fbc8c36a785bd3 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -170,7 +170,7 @@ 
 		};
 	};
 
-	vcc_sdhi0: regulator@0 {
+	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI0 Vcc";
@@ -181,7 +181,7 @@ 
 		enable-active-high;
 	};
 
-	vccq_sdhi0: regulator@1 {
+	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI0 VccQ";
@@ -194,7 +194,7 @@ 
 			  1800000 0>;
 	};
 
-	vcc_sdhi1: regulator@2 {
+	vcc_sdhi1: regulator-vcc-sdhi1 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI1 Vcc";
@@ -205,7 +205,7 @@ 
 		enable-active-high;
 	};
 
-	vccq_sdhi1: regulator@3 {
+	vccq_sdhi1: regulator-vccq-sdhi1 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI1 VccQ";
@@ -218,7 +218,7 @@ 
 			  1800000 0>;
 	};
 
-	vcc_sdhi2: regulator@4 {
+	vcc_sdhi2: regulator-vcc-sdhi2 {
 		compatible = "regulator-fixed";
 
 		regulator-name = "SDHI2 Vcc";
@@ -229,7 +229,7 @@ 
 		enable-active-high;
 	};
 
-	vccq_sdhi2: regulator@5 {
+	vccq_sdhi2: regulator-vccq-sdhi2 {
 		compatible = "regulator-gpio";
 
 		regulator-name = "SDHI2 VccQ";