diff mbox

[13/19] ARM: dts: gose: Name serial port pfc subnodes after device names

Message ID 1465563665-2231-14-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Commit 167d34af3d8b3b66dc57f60f473a1a1f4ca3cb9d
Headers show

Commit Message

Geert Uytterhoeven June 10, 2016, 1 p.m. UTC 
Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7793-gose.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index f748360ee85712f1..995e1e0fb1ff4f57 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -320,12 +320,12 @@ 
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};