diff mbox

[v5,2/4] ARM: dts: lager: Add entries for VIN HDMI input support

Message ID 1467819576-17743-3-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Ulrich Hecht July 6, 2016, 3:39 p.m. UTC
From: William Towle <william.towle@codethink.co.uk>

Add DT entries for vin0, vin0_pins, and adv7612.

Sets the 'default-input' property for ADV7612, enabling image and video
capture without the need to have userspace specifying routing.

Signed-off-by: William Towle <william.towle@codethink.co.uk>
Signed-off-by: Rob Taylor <rob.taylor@codethink.co.uk>
[uli: added interrupt, renamed endpoint, merged default-input]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 41 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 40 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 5e43763..263c7b9 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -427,7 +427,12 @@ 
 		function = "usb2";
 	};
 
-	vin1_pins: vin1 {
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
+	vin1_pins: vin {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
 	};
@@ -608,6 +613,21 @@ 
 		reg = <0x12>;
 	};
 
+	hdmi-in@4c {
+		compatible = "adi,adv7612";
+		reg = <0x4c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		remote = <&vin0>;
+		default-input = <0>;
+
+		port {
+			adv7612: endpoint {
+				remote-endpoint = <&vin0ep0>;
+			};
+		};
+	};
+
 	composite-in@20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -723,6 +743,25 @@ 
 	status = "okay";
 };
 
+/* HDMI video input */
+&vin0 {
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	status = "ok";
+
+	port {
+		vin0ep0: endpoint {
+			remote-endpoint = <&adv7612>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	pinctrl-0 = <&vin1_pins>;