@@ -346,6 +346,8 @@ struct usb_gadget_ops {
* or B-Peripheral wants to take host role.
* @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
* MaxPacketSize.
+ * @quirk_avoids_skb_reserve: udc/platform wants to avoid skb_reserve() in
+ * u_ether.c to improve performance.
* @is_selfpowered: if the gadget is self-powered.
* @deactivated: True if gadget is deactivated - in deactivated state it cannot
* be connected.
@@ -398,6 +400,7 @@ struct usb_gadget {
unsigned quirk_altset_not_supp:1;
unsigned quirk_stall_not_supp:1;
unsigned quirk_zlp_not_supp:1;
+ unsigned quirk_avoids_skb_reserve:1;
unsigned is_selfpowered:1;
unsigned deactivated:1;
unsigned connected:1;
@@ -463,6 +466,16 @@ static inline int gadget_is_zlp_supported(struct usb_gadget *g)
}
/**
+ * gadget_avoids_skb_reserve - return true iff the hardware would like to avoid
+ * skb_reserve to improve performance.
+ * @g: controller to check for quirk
+ */
+static inline int gadget_avoids_skb_reserve(struct usb_gadget *g)
+{
+ return g->quirk_avoids_skb_reserve;
+}
+
+/**
* gadget_is_dualspeed - return true iff the hardware handles high speed
* @g: controller that might support both high and full speeds
*/
Some platforms (e.g. R-Car SoCs) has memory alignment restriction. If memory alignment is not match, the usb peripheral driver desides not to DMA controller. Then, the performance is not good. In the case of u_ether.c, since it calls skb_reserve() in rx_submit(), it is possible to cause memory alignment mispatch in some platforms (like R-Car SoCs). So, this patch adds a new quirk "quirk_avoids_skb_reserve" to avoid skb_reserve() calling in u_ether.c to improve performance. A peripheral driver will set this flag and network gadget drivers (e.g. f_ncm.c) will reference the flag via gadget_avoids_skb_reserve(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- include/linux/usb/gadget.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)