diff mbox

[v6,3/4] ARM: dts: koelsch: add HDMI input

Message ID 1469178554-20719-4-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Ulrich Hecht July 22, 2016, 9:09 a.m. UTC 
From: Hans Verkuil <hverkuil@xs4all.nl>

Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 41 +++++++++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 980f41b..28ec3a8 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -400,6 +400,21 @@ 
 			};
 		};
 
+		hdmi-in@4c {
+			compatible = "adi,adv7612";
+			reg = <0x4c>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+			remote = <&vin0>;
+			default-input = <0>;
+
+			port {
+				adv7612: endpoint {
+					remote-endpoint = <&vin0ep>;
+				};
+			};
+		};
+
 		eeprom@50 {
 			compatible = "renesas,24c02";
 			reg = <0x50>;
@@ -534,6 +549,11 @@ 
 		function = "usb1";
 	};
 
+	vin0_pins: vin0 {
+		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+		function = "vin0";
+	};
+
 	vin1_pins: vin1 {
 		groups = "vin1_data8", "vin1_clk";
 		function = "vin1";
@@ -765,6 +785,27 @@ 
 	cpu0-supply = <&vdd_dvfs>;
 };
 
+/* HDMI video input */
+&vin0 {
+	status = "okay";
+	pinctrl-0 = <&vin0_pins>;
+	pinctrl-names = "default";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		vin0ep: endpoint {
+			remote-endpoint = <&adv7612>;
+			bus-width = <24>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+			data-active = <1>;
+		};
+	};
+};
+
 /* composite video input */
 &vin1 {
 	status = "okay";