diff mbox

[v7,02/11] arm64: dts: r8a7795: salvator-x: enable UHS for SDHI 0 & 3

Message ID 1473764228-24768-3-git-send-email-horms+renesas@verge.net.au (mailing list archive)
State Accepted
Commit 2a927eeaf6b64f39b4f0907417f85c7ee1d26119
Delegated to: Simon Horman
Headers show

Commit Message

Simon Horman Sept. 13, 2016, 10:56 a.m. UTC 
From: Wolfram Sang <wsa+renesas@sang-engineering.com>

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
v6
* Updated patch prefix: s/salvator/&-x/

v5
* Added to series, previously posted by Wolfram independently
---
 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

Comments

Simon Horman Sept. 16, 2016, 9:55 a.m. UTC | #1 
On Tue, Sep 13, 2016 at 12:56:59PM +0200, Simon Horman wrote:
> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

As SDR50 support is present in the driver in mainline (correct me if I am
wrong!) I am queuing this up.
Wolfram Sang Sept. 16, 2016, 10:22 a.m. UTC | #2 
On Fri, Sep 16, 2016 at 11:55:00AM +0200, Simon Horman wrote:
> On Tue, Sep 13, 2016 at 12:56:59PM +0200, Simon Horman wrote:
> > From: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > 
> > Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> 
> As SDR50 support is present in the driver in mainline (correct me if I am
> wrong!) I am queuing this up.

Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index b1eab6876f8c..ff4e4fe843ed 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -237,11 +237,25 @@ 
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
 	};
 
 	sdhi3_pins: sd3 {
 		groups = "sdhi3_data4", "sdhi3_ctrl";
 		function = "sdhi3";
+		power-source = <3300>;
+	};
+
+	sdhi3_pins_uhs: sd3_uhs {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
 	};
 
 	sound_pins: sound {
@@ -371,25 +385,29 @@ 
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi3 {
 	pinctrl-0 = <&sdhi3_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi3_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
 
 	vmmc-supply = <&vcc_sdhi3>;
 	vqmmc-supply = <&vccq_sdhi3>;
 	cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	bus-width = <4>;
+	sd-uhs-sdr50;
 	status = "okay";
 };