@@ -102,7 +102,7 @@ static void rpf_configure(struct vsp1_entity *entity,
* of the pipeline.
*/
output = vsp1_entity_get_pad_format(wpf, wpf->config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
crop.width = pipe->partition.width * input_width
/ output->width;
@@ -118,6 +118,11 @@ static int vsp1_rwpf_set_format(struct v4l2_subdev *subdev,
RWPF_PAD_SOURCE);
*format = fmt->format;
+ if (rwpf->flip.rotate) {
+ format->width = fmt->format.height;
+ format->height = fmt->format.width;
+ }
+
done:
mutex_unlock(&rwpf->entity.lock);
return ret;
@@ -56,9 +56,10 @@ struct vsp1_rwpf {
struct {
spinlock_t lock;
- struct v4l2_ctrl *ctrls[2];
+ struct v4l2_ctrl *ctrls[3];
unsigned int pending;
unsigned int active;
+ bool rotate;
} flip;
struct vsp1_rwpf_memory mem;
@@ -179,9 +179,12 @@ static void vsp1_video_pipeline_setup_partitions(struct vsp1_pipeline *pipe)
struct vsp1_entity *entity;
unsigned int div_size;
+ /* Partitions are computed on the size before rotation, use the format
+ * at the WPF sink.
+ */
format = vsp1_entity_get_pad_format(&pipe->output->entity,
pipe->output->entity.config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
div_size = format->width;
/* Gen2 hardware doesn't require image partitioning. */
@@ -221,9 +224,12 @@ static struct v4l2_rect vsp1_video_partition(struct vsp1_pipeline *pipe,
struct v4l2_rect partition;
unsigned int modulus;
+ /* Partitions are computed on the size before rotation, use the format
+ * at the WPF sink.
+ */
format = vsp1_entity_get_pad_format(&pipe->output->entity,
pipe->output->entity.config,
- RWPF_PAD_SOURCE);
+ RWPF_PAD_SINK);
/* A single partition simply processes the output size in full. */
if (pipe->partitions <= 1) {
@@ -43,32 +43,92 @@ static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf,
enum wpf_flip_ctrl {
WPF_CTRL_VFLIP = 0,
WPF_CTRL_HFLIP = 1,
- WPF_CTRL_MAX,
+ WPF_CTRL_ROTATE = 2,
};
+static int vsp1_wpf_set_rotation(struct vsp1_rwpf *wpf, unsigned int rotation)
+{
+ struct media_device *mdev = &wpf->entity.vsp1->media_dev;
+ struct v4l2_mbus_framefmt *sink_format;
+ struct v4l2_mbus_framefmt *source_format;
+ bool rotate;
+ int ret = 0;
+
+ /* Only consider the 0°/180° from/to 90°/270° modifications, the rest
+ * is taken care of by the flipping configuration.
+ */
+ rotate = rotation == 90 || rotation == 270;
+ if (rotate == wpf->flip.rotate)
+ return 0;
+
+ /* Changing rotation isn't allowed during streaming. */
+ mutex_lock(&mdev->graph_mutex);
+
+ if (wpf->entity.subdev.entity.stream_count) {
+ ret = -EBUSY;
+ goto done;
+ }
+
+ sink_format = vsp1_entity_get_pad_format(&wpf->entity,
+ wpf->entity.config,
+ RWPF_PAD_SINK);
+ source_format = vsp1_entity_get_pad_format(&wpf->entity,
+ wpf->entity.config,
+ RWPF_PAD_SOURCE);
+
+ mutex_lock(&wpf->entity.lock);
+
+ if (rotate) {
+ source_format->width = sink_format->height;
+ source_format->height = sink_format->width;
+ } else {
+ source_format->width = sink_format->width;
+ source_format->height = sink_format->height;
+ }
+
+ wpf->flip.rotate = rotate;
+
+ mutex_unlock(&wpf->entity.lock);
+
+done:
+ mutex_unlock(&mdev->graph_mutex);
+ return ret;
+}
+
static int vsp1_wpf_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vsp1_rwpf *wpf =
container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
- unsigned int i;
+ unsigned int rotation;
u32 flip = 0;
+ int ret;
- switch (ctrl->id) {
- case V4L2_CID_HFLIP:
- case V4L2_CID_VFLIP:
- for (i = 0; i < WPF_CTRL_MAX; ++i) {
- if (wpf->flip.ctrls[i])
- flip |= wpf->flip.ctrls[i]->val ? BIT(i) : 0;
- }
+ /* Update the rotation. */
+ rotation = wpf->flip.ctrls[WPF_CTRL_ROTATE]
+ ? wpf->flip.ctrls[WPF_CTRL_ROTATE]->val : 0;
- spin_lock_irq(&wpf->flip.lock);
- wpf->flip.pending = flip;
- spin_unlock_irq(&wpf->flip.lock);
- break;
+ ret = vsp1_wpf_set_rotation(wpf, rotation);
+ if (ret < 0)
+ return ret;
- default:
- return -EINVAL;
- }
+ /* Compute the flip value resulting from all three controls, with
+ * rotation by 180° flipping the image in both directions. Store the
+ * result in the pending flip field for the next frame that will be
+ * processed.
+ */
+ if (wpf->flip.ctrls[WPF_CTRL_VFLIP]->val)
+ flip |= BIT(WPF_CTRL_VFLIP);
+
+ if (wpf->flip.ctrls[WPF_CTRL_HFLIP] &&
+ wpf->flip.ctrls[WPF_CTRL_HFLIP]->val)
+ flip |= BIT(WPF_CTRL_HFLIP);
+
+ if (rotation == 180 || rotation == 270)
+ flip ^= BIT(WPF_CTRL_VFLIP) | BIT(WPF_CTRL_HFLIP);
+
+ spin_lock_irq(&wpf->flip.lock);
+ wpf->flip.pending = flip;
+ spin_unlock_irq(&wpf->flip.lock);
return 0;
}
@@ -88,10 +148,10 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf)
/* Only WPF0 supports flipping. */
num_flip_ctrls = 0;
} else if (vsp1->info->features & VSP1_HAS_WPF_HFLIP) {
- /* When horizontal flip is supported the WPF implements two
- * controls (horizontal flip and vertical flip).
+ /* When horizontal flip is supported the WPF implements three
+ * controls (horizontal flip, vertical flip and rotation).
*/
- num_flip_ctrls = 2;
+ num_flip_ctrls = 3;
} else if (vsp1->info->features & VSP1_HAS_WPF_VFLIP) {
/* When only vertical flip is supported the WPF implements a
* single control (vertical flip).
@@ -110,12 +170,14 @@ static int wpf_init_controls(struct vsp1_rwpf *wpf)
V4L2_CID_VFLIP, 0, 1, 1, 0);
}
- if (num_flip_ctrls == 2) {
+ if (num_flip_ctrls == 3) {
wpf->flip.ctrls[WPF_CTRL_HFLIP] =
v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
-
- v4l2_ctrl_cluster(2, wpf->flip.ctrls);
+ wpf->flip.ctrls[WPF_CTRL_ROTATE] =
+ v4l2_ctrl_new_std(&wpf->ctrls, &vsp1_wpf_ctrl_ops,
+ V4L2_CID_ROTATE, 0, 270, 90, 0);
+ v4l2_ctrl_cluster(3, wpf->flip.ctrls);
}
if (wpf->ctrls.error) {
@@ -215,10 +277,11 @@ static void wpf_configure(struct vsp1_entity *entity,
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
+ const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
struct vsp1_rwpf_memory mem = wpf->mem;
unsigned int flip = wpf->flip.active;
- unsigned int width = source_format->width;
- unsigned int height = source_format->height;
+ unsigned int width = sink_format->width;
+ unsigned int height = sink_format->height;
unsigned int offset;
/* Cropping. The partition algorithm can split the image into
@@ -239,44 +302,75 @@ static void wpf_configure(struct vsp1_entity *entity,
/* Update the memory offsets based on flipping configuration.
* The destination addresses point to the locations where the
- * VSP starts writing to memory, which can be different corners
- * of the image depending on vertical flipping.
+ * VSP starts writing to memory, which can be any corner of the
+ * image depending on the combination of flipping and rotation.
*/
- if (pipe->partitions > 1) {
- const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
- /* Horizontal flipping is handled through a line buffer
- * and doesn't modify the start address, but still needs
- * to be handled when image partitioning is in effect to
- * order the partitions correctly.
- */
- if (flip & BIT(WPF_CTRL_HFLIP))
- offset = format->width - pipe->partition.left
- - pipe->partition.width;
+ /* First take the partition left coordinate into account.
+ * Compute the offset to order the partitions correctly on the
+ * output based on whether flipping is enabled. Consider
+ * horizontal flipping when rotation is disabled but vertical
+ * flipping when rotation is enabled, as rotating the image
+ * switches the horizontal and vertical directions. The offset
+ * is applied horizontally or vertically accordingly.
+ */
+ if (flip & BIT(WPF_CTRL_HFLIP) && !wpf->flip.rotate)
+ offset = format->width - pipe->partition.left
+ - pipe->partition.width;
+ else if (flip & BIT(WPF_CTRL_VFLIP) && wpf->flip.rotate)
+ offset = format->height - pipe->partition.left
+ - pipe->partition.width;
+ else
+ offset = pipe->partition.left;
+
+ for (i = 0; i < format->num_planes; ++i) {
+ unsigned int hsub = i > 0 ? fmtinfo->hsub : 1;
+ unsigned int vsub = i > 0 ? fmtinfo->vsub : 1;
+
+ if (wpf->flip.rotate)
+ mem.addr[i] += offset / vsub
+ * format->plane_fmt[i].bytesperline;
else
- offset = pipe->partition.left;
-
- mem.addr[0] += offset * fmtinfo->bpp[0] / 8;
- if (format->num_planes > 1) {
- mem.addr[1] += offset / fmtinfo->hsub
- * fmtinfo->bpp[1] / 8;
- mem.addr[2] += offset / fmtinfo->hsub
- * fmtinfo->bpp[2] / 8;
- }
+ mem.addr[i] += offset / hsub
+ * fmtinfo->bpp[i] / 8;
}
if (flip & BIT(WPF_CTRL_VFLIP)) {
- mem.addr[0] += (format->height - 1)
+ /* When rotating the output (after rotation) image
+ * height is equal to the partition width (before
+ * rotation). Otherwise it is equal to the output
+ * image height.
+ */
+ if (wpf->flip.rotate)
+ height = pipe->partition.width;
+ else
+ height = format->height;
+
+ mem.addr[0] += (height - 1)
* format->plane_fmt[0].bytesperline;
if (format->num_planes > 1) {
- offset = (format->height / wpf->fmtinfo->vsub - 1)
+ offset = (height / fmtinfo->vsub - 1)
* format->plane_fmt[1].bytesperline;
mem.addr[1] += offset;
mem.addr[2] += offset;
}
}
+ if (wpf->flip.rotate && !(flip & BIT(WPF_CTRL_HFLIP))) {
+ unsigned int hoffset = max(0, (int)format->width - 16);
+
+ /* Compute the output coordinate. The partition
+ * horizontal (left) offset becomes a vertical offset.
+ */
+ for (i = 0; i < format->num_planes; ++i) {
+ unsigned int hsub = i > 0 ? fmtinfo->hsub : 1;
+
+ mem.addr[i] += hoffset / hsub
+ * fmtinfo->bpp[i] / 8;
+ }
+ }
+
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]);
@@ -290,6 +384,9 @@ static void wpf_configure(struct vsp1_entity *entity,
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
+ if (wpf->flip.rotate)
+ outfmt |= VI6_WPF_OUTFMT_ROT;
+
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
@@ -350,9 +447,18 @@ static void wpf_configure(struct vsp1_entity *entity,
VI6_WFP_IRQ_ENB_DFEE);
}
+static unsigned int wpf_max_width(struct vsp1_entity *entity,
+ struct vsp1_pipeline *pipe)
+{
+ struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
+
+ return wpf->flip.rotate ? 256 : wpf->max_width;
+}
+
static const struct vsp1_entity_operations wpf_entity_ops = {
.destroy = vsp1_wpf_destroy,
.configure = wpf_configure,
+ .max_width = wpf_max_width,
};
/* -----------------------------------------------------------------------------
Some WPF instances, on Gen3 devices, can perform 90° rotation when writing frames to memory. Implement support for this using the V4L2_CID_ROTATE control. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- drivers/media/platform/vsp1/vsp1_rpf.c | 2 +- drivers/media/platform/vsp1/vsp1_rwpf.c | 5 + drivers/media/platform/vsp1/vsp1_rwpf.h | 3 +- drivers/media/platform/vsp1/vsp1_video.c | 10 +- drivers/media/platform/vsp1/vsp1_wpf.c | 200 +++++++++++++++++++++++-------- 5 files changed, 169 insertions(+), 51 deletions(-)