diff mbox

[9/9,v2] arm64: dts: m3ulcb: enable SDHI2

Message ID 1478614482-9959-1-git-send-email-vladimir.barinov@cogentembedded.com (mailing list archive)
State Accepted
Commit fd51baee7abc388916b3e3b58dc062ef9c534150
Headers show

Commit Message

Vladimir Barinov Nov. 8, 2016, 2:14 p.m. UTC 
This supports SDHI2 for M3ULCB onboard eMMC

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Changes in version 2:
- renamed sdhi2_pins_3v3 to sdhi2_pins
- renamed sd2_3v3 to sd2
- renamed sdhi2_pins_1v8 to sdhi2_pins_uhs
- renamed sd2_1v8 to sd2_uhs

 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 43 ++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index a244edb..e46687e 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -55,6 +55,24 @@ 
 		};
 	};
 
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -113,6 +131,18 @@ 
 		function = "sdhi0";
 		power-source = <1800>;
 	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data8", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
 };
 
 &sdhi0 {
@@ -128,6 +158,19 @@ 
 	status = "okay";
 };
 
+&sdhi2 {
+	/* used for on-board 8bit eMMC */
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &scif2 {
 	pinctrl-0 = <&scif2_pins>;
 	pinctrl-names = "default";