@@ -185,6 +185,9 @@
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&mstp4_clks R8A7790_CLK_INTC_SYS>;
+ clock-names = "clk";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
};
gpio0: gpio@e6050000 {
@@ -1364,10 +1367,10 @@
mstp4_clks: mstp4_clks@e6150140 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
- clocks = <&cp_clk>;
+ clocks = <&cp_clk>, <&zs_clk>;
#clock-cells = <1>;
- clock-indices = <R8A7790_CLK_IRQC>;
- clock-output-names = "irqc";
+ clock-indices = <R8A7790_CLK_IRQC R8A7790_CLK_INTC_SYS>;
+ clock-output-names = "irqc", "intc-sys";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
@@ -82,6 +82,7 @@
/* MSTP4 */
#define R8A7790_CLK_IRQC 7
+#define R8A7790_CLK_INTC_SYS 8
/* MSTP5 */
#define R8A7790_CLK_AUDIO_DMAC1 1
Link the ARM GIC to the INTC-SYS module clock, and add it to the "always on" PM Domain, so it can be power managed using that clock. Note that currently the GIC-400 driver doesn't support module clocks nor Runtime PM, so this must be handled as a critical clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - Drop RFC status, - Rebased on top of CPG Clock Domain support, - Add clock-names property, - Change one-line summary prefix to match current arm-soc practices. - Rebased on top of R-Car SYSC PM Domain support, - s/GIC driver/GIC-400 driver/, - Document critical clock dependency. --- arch/arm/boot/dts/r8a7790.dtsi | 9 ++++++--- include/dt-bindings/clock/r8a7790-clock.h | 1 + 2 files changed, 7 insertions(+), 3 deletions(-)