diff mbox

[RFC,v2,6/6] ARM: dts: blanche: add SCIF1 and MAX9260 deserializer

Message ID 1500305076-15570-7-git-send-email-ulrich.hecht+renesas@gmail.com (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Ulrich Hecht July 17, 2017, 3:24 p.m. UTC
Adds serial port SCIF1 and the MAX9260 deserializers connected to it.

Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
---
 arch/arm/boot/dts/r8a7792-blanche.dts | 52 +++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

Comments

Geert Uytterhoeven July 18, 2017, 6:52 a.m. UTC | #1
Hi Uli,

On Mon, Jul 17, 2017 at 5:24 PM, Ulrich Hecht
<ulrich.hecht+renesas@gmail.com> wrote:
> Adds serial port SCIF1 and the MAX9260 deserializers connected to it.
>
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>

Thanks for your patch!

>  arch/arm/boot/dts/r8a7792-blanche.dts | 52 +++++++++++++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
> index 9b67dca..2ae9a87 100644
> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts

>         status = "okay";
>  };
>
> +&scif1 {
> +       pinctrl-0 = <&scif1_pins>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +
> +       mux-controls = <&mux>;
> +
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       gmsl-deserializer@0 {
> +               compatible = "maxim,max9260";
> +               reg = <0x8>;

unit address and reg property don't match.

(try "make dtbs W=1")

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Laurent Pinchart July 31, 2017, 11:20 a.m. UTC | #2
Hi Ulrich,

Thank you for the patch.

On Monday 17 Jul 2017 17:24:36 Ulrich Hecht wrote:
> Adds serial port SCIF1 and the MAX9260 deserializers connected to it.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> ---
>  arch/arm/boot/dts/r8a7792-blanche.dts | 52 +++++++++++++++++++++++++++++++

You're probably aware of this already, but you need to document the DT 
bindings :-)

>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts
> b/arch/arm/boot/dts/r8a7792-blanche.dts index 9b67dca..2ae9a87 100644
> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -21,6 +21,7 @@
>  	aliases {
>  		serial0 = &scif0;
>  		serial1 = &scif3;
> +		serial2 = &scif1;
>  	};
> 
>  	chosen {
> @@ -186,6 +187,16 @@
>  		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	mux: mux-controller {
> +		compatible = "gpio-mux";
> +		#mux-control-cells = <0>;
> +
> +		mux-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 13 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 14 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 15 GPIO_ACTIVE_HIGH>;
> +	};
>  };
> 
>  &extal_clk {
> @@ -202,6 +213,11 @@
>  		function = "scif0";
>  	};
> 
> +	scif1_pins: scif1 {
> +		groups = "scif1_data";
> +		function = "scif1";
> +	};
> +
>  	scif3_pins: scif3 {
>  		groups = "scif3_data";
>  		function = "scif3";
> @@ -246,6 +262,42 @@
>  	status = "okay";
>  };
> 
> +&scif1 {
> +	pinctrl-0 = <&scif1_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +
> +	mux-controls = <&mux>;
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	gmsl-deserializer@0 {
> +		compatible = "maxim,max9260";
> +		reg = <0x8>;
> +	};
> +	gmsl-deserializer@1 {
> +		compatible = "maxim,max9260";
> +		reg = <0x9>;
> +	};
> +	gmsl-deserializer@2 {
> +		compatible = "maxim,max9260";
> +		reg = <0xa>;
> +	};
> +	gmsl-deserializer@3 {
> +		compatible = "maxim,max9260";
> +		reg = <0xb>;
> +	};
> +	gmsl-deserializer@4 {
> +		compatible = "maxim,max9260";
> +		reg = <0x4>;
> +	};
> +	gmsl-deserializer@5 {
> +		compatible = "maxim,max9260";
> +		reg = <0x5>;
> +	};
> +};
> +
>  &scif3 {
>  	pinctrl-0 = <&scif3_pins>;
>  	pinctrl-names = "default";
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts
index 9b67dca..2ae9a87 100644
--- a/arch/arm/boot/dts/r8a7792-blanche.dts
+++ b/arch/arm/boot/dts/r8a7792-blanche.dts
@@ -21,6 +21,7 @@ 
 	aliases {
 		serial0 = &scif0;
 		serial1 = &scif3;
+		serial2 = &scif1;
 	};
 
 	chosen {
@@ -186,6 +187,16 @@ 
 		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>,
+			    <&gpio5 13 GPIO_ACTIVE_HIGH>,
+			    <&gpio5 14 GPIO_ACTIVE_HIGH>,
+			    <&gpio5 15 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &extal_clk {
@@ -202,6 +213,11 @@ 
 		function = "scif0";
 	};
 
+	scif1_pins: scif1 {
+		groups = "scif1_data";
+		function = "scif1";
+	};
+
 	scif3_pins: scif3 {
 		groups = "scif3_data";
 		function = "scif3";
@@ -246,6 +262,42 @@ 
 	status = "okay";
 };
 
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	mux-controls = <&mux>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gmsl-deserializer@0 {
+		compatible = "maxim,max9260";
+		reg = <0x8>;
+	};
+	gmsl-deserializer@1 {
+		compatible = "maxim,max9260";
+		reg = <0x9>;
+	};
+	gmsl-deserializer@2 {
+		compatible = "maxim,max9260";
+		reg = <0xa>;
+	};
+	gmsl-deserializer@3 {
+		compatible = "maxim,max9260";
+		reg = <0xb>;
+	};
+	gmsl-deserializer@4 {
+		compatible = "maxim,max9260";
+		reg = <0x4>;
+	};
+	gmsl-deserializer@5 {
+		compatible = "maxim,max9260";
+		reg = <0x5>;
+	};
+};
+
 &scif3 {
 	pinctrl-0 = <&scif3_pins>;
 	pinctrl-names = "default";