diff mbox

[5/8] ARM: dts: iwg22d-sodimm-dbhd-ca: Add can1 support to HDMI DB

Message ID 1510067449-17017-6-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State Accepted
Commit d6033e7c6589c74299635eb3d84c56ccac8db5e4
Delegated to: Simon Horman
Headers show

Commit Message

Fabrizio Castro Nov. 7, 2017, 3:10 p.m. UTC 
CAN1 interface is exposed via connector J1 found on the HDMI daughter
board. This patch enables can1 DT node from within the daughter board
specific device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
index a8a4ec8..d34de82 100644
--- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
+++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts
@@ -54,6 +54,13 @@ 
 	};
 };
 
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &hscif2 {
 	pinctrl-0 = <&hscif2_pins>;
 	pinctrl-names = "default";
@@ -105,6 +112,11 @@ 
 };
 
 &pfc {
+	can1_pins: can1 {
+		groups = "can1_data_b";
+		function = "can1";
+	};
+
 	du0_pins: du0 {
 		groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
 		function = "du0";