diff mbox

[v2,4/4] ARM: dts: alt: Convert to named i2c-gpio bindings

Message ID 1512046646-15253-5-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Commit 7f32eddb81ecc06131a643babe2d0f961fbd7f08
Headers show

Commit Message

Geert Uytterhoeven Nov. 30, 2017, 12:57 p.m. UTC 
Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
more error-prone unnamed variant.

Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
flags, which were implicitly assumed before.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v2:
  - New.
---
 arch/arm/boot/dts/r8a7794-alt.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

Comments

Linus Walleij Dec. 2, 2017, 3:25 p.m. UTC | #1 
On Thu, Nov 30, 2017 at 1:57 PM, Geert Uytterhoeven
<geert+renesas@glider.be> wrote:

> Commits 7d29f509d2cfd807 ("dt-bindings: i2c: i2c-gpio: Add support for
> named gpios") and 05c74778858d7d99 ("i2c: gpio: Add support for named
> gpios in DT") introduced named i2c-gpio DT bindings, and deprecated the
> more error-prone unnamed variant.
>
> Switch to the new bindings, and add the missing GPIO_OPEN_DRAIN I/O
> flags, which were implicitly assumed before.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index bd98790d964e13a7..60c6515c499660eb 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -143,9 +143,8 @@ 
 		#size-cells = <0>;
 		compatible = "i2c-gpio";
 		status = "disabled";
-		gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
-			 &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
-			>;
+		sda-gpios = <&gpio4 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <5>;
 	};