diff mbox

[1/6] ARM: shmobile: defconfig: Enable PWM

Message ID 1513248976-26700-2-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Fabrizio Castro Dec. 14, 2017, 10:56 a.m. UTC
RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support
by default.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
---
 arch/arm/configs/shmobile_defconfig | 1 +
 1 file changed, 1 insertion(+)

Comments

Geert Uytterhoeven Dec. 15, 2017, 8:53 a.m. UTC | #1
Hi Fabrizio,

On Thu, Dec 14, 2017 at 11:56 AM, Fabrizio Castro
<fabrizio.castro@bp.renesas.com> wrote:
> RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support
> by default.
>
> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das@bp.renesas.com>

Thanks for your patch!

If I'm not mistaken, there are no current users of this PWM block in the
current R-Car Gen2 and RZ/G1 DTS files?
If that's correct, I don't think it makes much sense to enable it already.

Simon: what do you think?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Fabrizio Castro Dec. 15, 2017, 9:48 a.m. UTC | #2
Hi Geert,

> Subject: Re: [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM

>

> Hi Fabrizio,

>

> On Thu, Dec 14, 2017 at 11:56 AM, Fabrizio Castro

> <fabrizio.castro@bp.renesas.com> wrote:

> > RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support

> > by default.

> >

> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>

> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>

>

> Thanks for your patch!


Thank you for your feedback.

>

> If I'm not mistaken, there are no current users of this PWM block in the

> current R-Car Gen2 and RZ/G1 DTS files?


PWM support will be needed very soon as we are going to use pwm3 on the iwg20d platform to control the RGB display backlight.
The work to add display support is in progress, I hope it will be ready by next week, would you rather I sent this patch with the series to add display support?

Thanks,
Fab

> If that's correct, I don't think it makes much sense to enable it already.

>

> Simon: what do you think?

>

> Gr{oetje,eeting}s,

>

>                         Geert

>

> --

> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

>

> In personal conversations with technical people, I call myself a hacker. But

> when I'm talking to journalists I just say "programmer" or something like that.

>                                 -- Linus Torvalds



[https://www2.renesas.eu/media/email/unicef_2017.jpg]

This Christmas, instead of sending out cards, Renesas Electronics Europe have decided to support Unicef with a donation. For further details click here<https://www.unicef.org/> to find out about the valuable work they do, helping children all over the world.
We would like to take this opportunity to wish you a Merry Christmas and a prosperous New Year.



Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
Geert Uytterhoeven Dec. 15, 2017, 10:01 a.m. UTC | #3
Hi Fabrizio,

On Fri, Dec 15, 2017 at 10:48 AM, Fabrizio Castro
<fabrizio.castro@bp.renesas.com> wrote:
>> Subject: Re: [PATCH 1/6] ARM: shmobile: defconfig: Enable PWM
>> On Thu, Dec 14, 2017 at 11:56 AM, Fabrizio Castro
>> <fabrizio.castro@bp.renesas.com> wrote:
>> > RZ/G1 and R-Car platforms have PWM timers. This patch enables PWM support
>> > by default.
>> >
>> > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
>> > Reviewed-by: Biju Das <biju.das@bp.renesas.com>
>>
>> Thanks for your patch!
>
> Thank you for your feedback.
>
>>
>> If I'm not mistaken, there are no current users of this PWM block in the
>> current R-Car Gen2 and RZ/G1 DTS files?
>
> PWM support will be needed very soon as we are going to use pwm3 on the iwg20d platform to control the RGB display backlight.

Good to know, thanks!

> The work to add display support is in progress, I hope it will be ready by next week, would you rather I sent this patch with the series to add display support?

That's up to Simon.  But I guess it doesn't matter much, as defconfig updates
are queued in a separate branch anyway.

You may want to send a similar patch for multi_v7_defconfig.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox

Patch

diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index d60dbe1..578434c 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -208,6 +208,7 @@  CONFIG_STAGING_BOARD=y
 CONFIG_IIO=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
+CONFIG_PWM_RCAR=y
 CONFIG_PWM_RENESAS_TPU=y
 CONFIG_GENERIC_PHY=y
 CONFIG_PHY_RCAR_GEN2=y