diff mbox

[1/2] media: adv7604: Add support for i2c_new_secondary_device

Message ID 1516625389-6362-2-git-send-email-kieran.bingham@ideasonboard.com (mailing list archive)
State Not Applicable
Delegated to: Geert Uytterhoeven
Headers show

Commit Message

Kieran Bingham Jan. 22, 2018, 12:49 p.m. UTC
From: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>


The ADV7604 has thirteen 256-byte maps that can be accessed via the main
I²C ports. Each map has it own I²C address and acts as a standard slave
device on the I²C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>

[Kieran: Re-adapted for mainline]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>

---
Based upon the original posting :
  https://lkml.org/lkml/2014/10/22/469
---
 .../devicetree/bindings/media/i2c/adv7604.txt      | 18 ++++++-
 drivers/media/i2c/adv7604.c                        | 60 ++++++++++++++--------
 2 files changed, 55 insertions(+), 23 deletions(-)

-- 
2.7.4

Comments

Rob Herring (Arm) Jan. 29, 2018, 8:08 p.m. UTC | #1
On Mon, Jan 22, 2018 at 12:49:56PM +0000, Kieran Bingham wrote:
> From: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
> 
> The ADV7604 has thirteen 256-byte maps that can be accessed via the main
> I²C ports. Each map has it own I²C address and acts as a standard slave
> device on the I²C bus.
> 
> Allow a device tree node to override the default addresses so that
> address conflicts with other devices on the same bus may be resolved at
> the board description level.
> 
> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
> [Kieran: Re-adapted for mainline]
> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
> ---
> Based upon the original posting :
>   https://lkml.org/lkml/2014/10/22/469
> ---
>  .../devicetree/bindings/media/i2c/adv7604.txt      | 18 ++++++-

Reviewed-by: Rob Herring <robh@kernel.org>

In the future, please split bindings to separate patch.

>  drivers/media/i2c/adv7604.c                        | 60 ++++++++++++++--------
>  2 files changed, 55 insertions(+), 23 deletions(-)
Kieran Bingham Feb. 7, 2018, 3:54 p.m. UTC | #2
Hi Rob,

On 29/01/18 20:08, Rob Herring wrote:
> On Mon, Jan 22, 2018 at 12:49:56PM +0000, Kieran Bingham wrote:
>> From: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
>>
>> The ADV7604 has thirteen 256-byte maps that can be accessed via the main
>> I²C ports. Each map has it own I²C address and acts as a standard slave
>> device on the I²C bus.
>>
>> Allow a device tree node to override the default addresses so that
>> address conflicts with other devices on the same bus may be resolved at
>> the board description level.
>>
>> Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
>> [Kieran: Re-adapted for mainline]
>> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
>> ---
>> Based upon the original posting :
>>   https://lkml.org/lkml/2014/10/22/469
>> ---
>>  .../devicetree/bindings/media/i2c/adv7604.txt      | 18 ++++++-
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Thank you.

> In the future, please split bindings to separate patch.

Yes, of course - sorry - I should probably have known better here.

I was clearly being lazy as the original patch had bindings in with the driver.
Although I don't think I've got an excuse for the second patch in the series :D

I've split them out for the v2.

--
Kieran

>>  drivers/media/i2c/adv7604.c                        | 60 ++++++++++++++--------
>>  2 files changed, 55 insertions(+), 23 deletions(-)
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.txt b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
index 9cbd92eb5d05..b64e313dcc66 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv7604.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv7604.txt
@@ -13,7 +13,11 @@  Required Properties:
     - "adi,adv7611" for the ADV7611
     - "adi,adv7612" for the ADV7612
 
-  - reg: I2C slave address
+  - reg: I2C slave addresses
+    The ADV76xx has up to thirteen 256-byte maps that can be accessed via the
+    main I²C ports. Each map has it own I²C address and acts as a standard
+    slave device on the I²C bus. The main address is mandatory, others are
+    optional and revert to defaults if not specified.
 
   - hpd-gpios: References to the GPIOs that control the HDMI hot-plug
     detection pins, one per HDMI input. The active flag indicates the GPIO
@@ -35,6 +39,11 @@  Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the device's reset pin.
   - default-input: Select which input is selected after reset.
+  - reg-names : Names of maps with programmable addresses.
+		It can contain any map needing a non-default address.
+		Possible maps names are :
+		  "main", "avlink", "cec", "infoframe", "esdp", "dpp", "afe",
+		  "rep", "edid", "hdmi", "test", "cp", "vdp"
 
 Optional Endpoint Properties:
 
@@ -52,7 +61,12 @@  Example:
 
 	hdmi_receiver@4c {
 		compatible = "adi,adv7611";
-		reg = <0x4c>;
+		/*
+		 * The edid page will be accessible @ 0x66 on the i2c bus. All
+		 * other maps will retain their default addresses.
+		 */
+		reg = <0x4c 0x66>;
+		reg-names "main", "edid";
 
 		reset-gpios = <&ioexp 0 GPIO_ACTIVE_LOW>;
 		hpd-gpios = <&ioexp 2 GPIO_ACTIVE_HIGH>;
diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c
index 1544920ec52d..c346b9a8fb57 100644
--- a/drivers/media/i2c/adv7604.c
+++ b/drivers/media/i2c/adv7604.c
@@ -2734,6 +2734,27 @@  static const struct v4l2_ctrl_config adv76xx_ctrl_free_run_color = {
 
 /* ----------------------------------------------------------------------- */
 
+struct adv76xx_register {
+	const char *name;
+	u8 default_addr;
+};
+
+static const struct adv76xx_register adv76xx_secondary_names[] = {
+	[ADV76XX_PAGE_IO] = { "main", 0x4c },
+	[ADV7604_PAGE_AVLINK] = { "avlink", 0x42 },
+	[ADV76XX_PAGE_CEC] = { "cec", 0x40 },
+	[ADV76XX_PAGE_INFOFRAME] = { "infoframe", 0x3e },
+	[ADV7604_PAGE_ESDP] = { "esdp", 0x38 },
+	[ADV7604_PAGE_DPP] = { "dpp", 0x3c },
+	[ADV76XX_PAGE_AFE] = { "afe", 0x26 },
+	[ADV76XX_PAGE_REP] = { "rep", 0x32 },
+	[ADV76XX_PAGE_EDID] = { "edid", 0x36 },
+	[ADV76XX_PAGE_HDMI] = { "hdmi", 0x34 },
+	[ADV76XX_PAGE_TEST] = { "test", 0x30 },
+	[ADV76XX_PAGE_CP] = { "cp", 0x22 },
+	[ADV7604_PAGE_VDP] = { "vdp", 0x24 },
+};
+
 static int adv76xx_core_init(struct v4l2_subdev *sd)
 {
 	struct adv76xx_state *state = to_state(sd);
@@ -2834,13 +2855,26 @@  static void adv76xx_unregister_clients(struct adv76xx_state *state)
 }
 
 static struct i2c_client *adv76xx_dummy_client(struct v4l2_subdev *sd,
-							u8 addr, u8 io_reg)
+					       unsigned int i)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct adv76xx_state *state = to_state(sd);
+	struct adv76xx_platform_data *pdata = &state->pdata;
+	unsigned int io_reg = 0xf2 + i;
+	struct i2c_client *new_client;
+
+	if (pdata && pdata->i2c_addresses[i])
+		new_client = i2c_new_dummy(client->adapter,
+					   pdata->i2c_addresses[i]);
+	else
+		new_client = i2c_new_secondary_device(client,
+				adv76xx_secondary_names[i].name,
+				adv76xx_secondary_names[i].default_addr);
 
-	if (addr)
-		io_write(sd, io_reg, addr << 1);
-	return i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1);
+	if (new_client)
+		io_write(sd, io_reg, new_client->addr << 1);
+
+	return new_client;
 }
 
 static const struct adv76xx_reg_seq adv7604_recommended_settings_afe[] = {
@@ -3115,20 +3149,6 @@  static int adv76xx_parse_dt(struct adv76xx_state *state)
 	/* Disable the interrupt for now as no DT-based board uses it. */
 	state->pdata.int1_config = ADV76XX_INT1_CONFIG_DISABLED;
 
-	/* Use the default I2C addresses. */
-	state->pdata.i2c_addresses[ADV7604_PAGE_AVLINK] = 0x42;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_CEC] = 0x40;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_INFOFRAME] = 0x3e;
-	state->pdata.i2c_addresses[ADV7604_PAGE_ESDP] = 0x38;
-	state->pdata.i2c_addresses[ADV7604_PAGE_DPP] = 0x3c;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_AFE] = 0x26;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_REP] = 0x32;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_EDID] = 0x36;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_HDMI] = 0x34;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_TEST] = 0x30;
-	state->pdata.i2c_addresses[ADV76XX_PAGE_CP] = 0x22;
-	state->pdata.i2c_addresses[ADV7604_PAGE_VDP] = 0x24;
-
 	/* Hardcode the remaining platform data fields. */
 	state->pdata.disable_pwrdnb = 0;
 	state->pdata.disable_cable_det_rst = 0;
@@ -3478,9 +3498,7 @@  static int adv76xx_probe(struct i2c_client *client,
 		if (!(BIT(i) & state->info->page_mask))
 			continue;
 
-		state->i2c_clients[i] =
-			adv76xx_dummy_client(sd, state->pdata.i2c_addresses[i],
-					     0xf2 + i);
+		state->i2c_clients[i] = adv76xx_dummy_client(sd, i);
 		if (!state->i2c_clients[i]) {
 			err = -ENOMEM;
 			v4l2_err(sd, "failed to create i2c client %u\n", i);