@@ -243,6 +243,30 @@
&i2c_dvfs {
status = "okay";
+
+ pmic: pmic@30 {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
+ compatible = "rohm,bd9571mwv";
+ reg = <0x30>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ regulators {
+ dvfs: dvfs {
+ regulator-name = "dvfs";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
&ohci1 {
@@ -276,6 +300,11 @@
function = "i2c2";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
Add a device node for the ROHM BD9571MWV PMIC. This was based on the example in the DT binding documentation, but using IRQ0 instead of a GPIO interrupt, as that matches the schematics, and because INTC-EX is a simpler block. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- v2: - New. --- arch/arm64/boot/dts/renesas/ulcb.dtsi | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)