diff mbox

[7/7] arm64: dts: renesas: eagle: Add ADV7511W and HDMI output

Message ID 1523020092-25540-8-git-send-email-jacopo+renesas@jmondi.org (mailing list archive)
State Changes Requested
Headers show

Commit Message

Jacopo Mondi April 6, 2018, 1:08 p.m. UTC 
From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Enable HDMI output adding the HDMI connector and the ADV7511W, connected
to THC63LVD1024 LVDS decoder output.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 +++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

Comments

Laurent Pinchart April 6, 2018, 1:51 p.m. UTC | #1 
Hi Jacopo,

Thank you for the patch.

On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> 
> Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> to THC63LVD1024 LVDS decoder output.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
>  1 file changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> @@ -32,6 +32,17 @@
>  		reg = <0x0 0x48000000 0x0 0x38000000>;
>  	};
> 
> +	hdmi-out {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi_con_out: endpoint {
> +				remote-endpoint = <&adv7511_out>;
> +			};
> +		};
> +	};
> +
>  	thc63lvd1024: lvds-decoder {
>  		compatible = "thine,thc63lvd1024";
> 
> @@ -41,11 +52,17 @@
> 
>  			port@0 {
>  				reg = <0>;
> -

This is unrelated, if you don't want a blank line here remove it from patch 
6/7 :-)

>  				thc63lvd1024_in: endpoint {
>  					remote-endpoint = <&lvds0_out>;
>  				};
>  			};
> +
> +			port@2 {
> +				reg = <2>;
> +				thc63lvd1024_out: endpoint {
> +					remote-endpoint = <&adv7511_in>;
> +				};
> +			};
>  		};
>  	};
>  };
> @@ -85,6 +102,38 @@
>  		gpio-controller;
>  		#gpio-cells = <2>;
>  	};
> +
> +	hdmi@39 {
> +		compatible = "adi,adv7511w";
> +		reg = <0x39>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> +
> +		adi,input-depth = <8>;
> +		adi,input-colorspace = "rgb";
> +		adi,input-clock = "1x";
> +		adi,input-style = <1>;
> +		adi,input-justification = "evenly";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +				adv7511_in: endpoint {
> +					remote-endpoint = <&thc63lvd1024_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +				adv7511_out: endpoint {
> +					remote-endpoint = <&hdmi_con_out>;
> +				};
> +			};
> +		};
> +	};
>  };
> 
>  &pfc {

With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Jacopo Mondi April 6, 2018, 2:16 p.m. UTC | #2 
Hi Laurent,

On Fri, Apr 06, 2018 at 04:51:11PM +0300, Laurent Pinchart wrote:
> Hi Jacopo,
>
> Thank you for the patch.
>
> On Friday, 6 April 2018 16:08:12 EEST Jacopo Mondi wrote:
> > From: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> >
> > Enable HDMI output adding the HDMI connector and the ADV7511W, connected
> > to THC63LVD1024 LVDS decoder output.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > ---
> >  arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 51 ++++++++++++++++++++++-
> >  1 file changed, 50 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 9d0e65d..e9f7b83
> > 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
> > @@ -32,6 +32,17 @@
> >  		reg = <0x0 0x48000000 0x0 0x38000000>;
> >  	};
> >
> > +	hdmi-out {
> > +		compatible = "hdmi-connector";
> > +		type = "a";
> > +
> > +		port {
> > +			hdmi_con_out: endpoint {
> > +				remote-endpoint = <&adv7511_out>;
> > +			};
> > +		};
> > +	};
> > +
> >  	thc63lvd1024: lvds-decoder {
> >  		compatible = "thine,thc63lvd1024";
> >
> > @@ -41,11 +52,17 @@
> >
> >  			port@0 {
> >  				reg = <0>;
> > -
>
> This is unrelated, if you don't want a blank line here remove it from patch
> 6/7 :-)

No, you're right, this is a leftover from me splitting a single a
patch in 3. According to your comments on other patches in the series
I shouldn't have done that to begin with :)

Thanks
  j

>
> >  				thc63lvd1024_in: endpoint {
> >  					remote-endpoint = <&lvds0_out>;
> >  				};
> >  			};
> > +
> > +			port@2 {
> > +				reg = <2>;
> > +				thc63lvd1024_out: endpoint {
> > +					remote-endpoint = <&adv7511_in>;
> > +				};
> > +			};
> >  		};
> >  	};
> >  };
> > @@ -85,6 +102,38 @@
> >  		gpio-controller;
> >  		#gpio-cells = <2>;
> >  	};
> > +
> > +	hdmi@39 {
> > +		compatible = "adi,adv7511w";
> > +		reg = <0x39>;
> > +		interrupt-parent = <&gpio1>;
> > +		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
> > +
> > +		adi,input-depth = <8>;
> > +		adi,input-colorspace = "rgb";
> > +		adi,input-clock = "1x";
> > +		adi,input-style = <1>;
> > +		adi,input-justification = "evenly";
> > +
> > +		ports {
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +
> > +			port@0 {
> > +				reg = <0>;
> > +				adv7511_in: endpoint {
> > +					remote-endpoint = <&thc63lvd1024_out>;
> > +				};
> > +			};
> > +
> > +			port@1 {
> > +				reg = <1>;
> > +				adv7511_out: endpoint {
> > +					remote-endpoint = <&hdmi_con_out>;
> > +				};
> > +			};
> > +		};
> > +	};
> >  };
> >
> >  &pfc {
>
> With patches 5/7, 6/7 and 7/7 merged together and the pinmux removed,
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> --
> Regards,
>
> Laurent Pinchart
>
>
>
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 9d0e65d..e9f7b83 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -32,6 +32,17 @@ 
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&adv7511_out>;
+			};
+		};
+	};
+
 	thc63lvd1024: lvds-decoder {
 		compatible = "thine,thc63lvd1024";
 
@@ -41,11 +52,17 @@ 
 
 			port@0 {
 				reg = <0>;
-
 				thc63lvd1024_in: endpoint {
 					remote-endpoint = <&lvds0_out>;
 				};
 			};
+
+			port@2 {
+				reg = <2>;
+				thc63lvd1024_out: endpoint {
+					remote-endpoint = <&adv7511_in>;
+				};
+			};
 		};
 	};
 };
@@ -85,6 +102,38 @@ 
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	hdmi@39 {
+		compatible = "adi,adv7511w";
+		reg = <0x39>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7511_in: endpoint {
+					remote-endpoint = <&thc63lvd1024_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7511_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
 };
 
 &pfc {