| Message ID | 1523357646-3946-5-git-send-email-jacopo+renesas@jmondi.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Simon Horman |
| Headers | show |
Hi Jacopo, Thank you for the patch. On Tuesday, 10 April 2018 13:54:06 EEST Jacopo Mondi wrote: > Enable HDMI output on Renesas R-Car V3M Eagle board. > > The HDMI output is enabled connecting the DU LVDS output to the > transparent LVDS converter THC63LVD1024, and successively routing its > RGB output to the ADV7511W HDMI encoder. > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > [for THC63LVD1024: ] > Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> > > --- > v1 -> v2: > - Squash patches [5/7], [6/7] and [7/7] of v1 in a single patch as > suggested by Laurent > - Remove DU pinmuxing as it is used for DU parallel RGB output only used > by Eagle's display expander board not enabled by this series. > --- > arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 93 +++++++++++++++++++++++ > 1 file changed, 93 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 3c5f598..1e2191d > 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts > @@ -31,6 +31,51 @@ > /* first 128MB is reserved for secure area. */ > reg = <0x0 0x48000000 0x0 0x38000000>; > }; > + > + hdmi-out { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_out: endpoint { > + remote-endpoint = <&adv7511_out>; > + }; > + }; > + }; > + > + d3p3: regulator-fixed { > + compatible = "regulator-fixed"; > + regulator-name = "fixed-3.3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + thc63lvd1024: lvds-decoder { Nitpicking, no need for a label, you never reference it. Apart from that, you can keep my Reviewed-by. > + compatible = "thine,thc63lvd1024"; > + > + vcc-supply = <&d3p3>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + thc63lvd1024_in: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + thc63lvd1024_out: endpoint { > + remote-endpoint = <&adv7511_in>; > + }; > + }; > + }; > + }; > }; > > &avb { > @@ -68,6 +113,38 @@ > gpio-controller; > #gpio-cells = <2>; > }; > + > + hdmi@39 { > + compatible = "adi,adv7511w"; > + reg = <0x39>; > + interrupt-parent = <&gpio1>; > + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; > + > + adi,input-depth = <8>; > + adi,input-colorspace = "rgb"; > + adi,input-clock = "1x"; > + adi,input-style = <1>; > + adi,input-justification = "evenly"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + adv7511_in: endpoint { > + remote-endpoint = <&thc63lvd1024_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + adv7511_out: endpoint { > + remote-endpoint = <&hdmi_con_out>; > + }; > + }; > + }; > + }; > }; > > &pfc { > @@ -93,3 +170,19 @@ > > status = "okay"; > }; > + > +&du { > + status = "okay"; > +}; > + > +&lvds0 { > + status = "okay"; > + > + ports { > + port@1 { > + lvds0_out: endpoint { > + remote-endpoint = <&thc63lvd1024_in>; > + }; > + }; > + }; > +};
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 3c5f598..1e2191d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -31,6 +31,51 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x38000000>; }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + d3p3: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + thc63lvd1024: lvds-decoder { + compatible = "thine,thc63lvd1024"; + + vcc-supply = <&d3p3>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; }; &avb { @@ -68,6 +113,38 @@ gpio-controller; #gpio-cells = <2>; }; + + hdmi@39 { + compatible = "adi,adv7511w"; + reg = <0x39>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7511_in: endpoint { + remote-endpoint = <&thc63lvd1024_out>; + }; + }; + + port@1 { + reg = <1>; + adv7511_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; }; &pfc { @@ -93,3 +170,19 @@ status = "okay"; }; + +&du { + status = "okay"; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +};