diff mbox series

[3/5] arm64: dts: r8a7796: Add cpuidle support for CA57 cores

Message ID 1534511968-19634-4-git-send-email-uli+renesas@fpond.eu (mailing list archive)
State Changes Requested
Delegated to: Simon Horman
Headers show
Series H3/M3-W cpuidle support | expand

Commit Message

Ulrich Hecht Aug. 17, 2018, 1:19 p.m. UTC 
From: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>

Enable cpuidle (core shutdown) support for R-Car M3-W CA57 cores.

Parameters were found after evaluation by gaku.inami.xw@bp.renesas.com; they
help to keep the performance and reduce the power consumption.

Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@rvc.renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[dien.pham.ry: Apply new cpuidle parameters]
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 258a327..3d30b05 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -134,6 +134,7 @@ 
 			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
@@ -146,6 +147,7 @@ 
 			power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			cpu-idle-states = <&CPU_SLEEP_0>;
 			clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
@@ -208,6 +210,20 @@ 
 			cache-unified;
 			cache-level = <2>;
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP_0: cpu-sleep-0 {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <400>;
+				exit-latency-us = <500>;
+				min-residency-us = <4000>;
+				status = "okay";
+			};
+		};
 	};
 
 	extal_clk: extal {