| Message ID | 1535711579-15169-4-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | usb: renesas_usbhs: add reset_control and multiple clocks management | expand |
Hi Shimoda-san, On Fri, Aug 31, 2018 at 12:36 PM Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> wrote: > R-Car Gen3 needs to enable clocks of both host and peripheral. > Since [eo]hci-platform disables the reset(s) when the drivers are > removed, renesas_usbhs driver doesn't work correctly. To fix this > issue, this patch adds multiple clocks management on this > renesas_usbhs driver. > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Thanks for your patch! > --- a/drivers/usb/renesas_usbhs/common.c > +++ b/drivers/usb/renesas_usbhs/common.c > @@ -336,11 +337,26 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) > { > struct platform_device *pdev = usbhs_priv_to_pdev(priv); > struct device *dev = usbhs_priv_to_dev(priv); > + int ret; > > if (enable) { > /* enable PM */ > pm_runtime_get_sync(dev); > > + /* enable clks if exist */ > + if (priv->num_clks) { > + ret = clk_bulk_prepare(priv->num_clks, priv->clks); > + if (!ret) { > + ret = clk_bulk_enable(priv->num_clks, > + priv->clks); > + if (ret) { > + clk_bulk_unprepare(priv->num_clks, > + priv->clks); > + return; > + } > + } I think you misunderstood my comment: you can replace the calls to clk_bulk_prepare() and clk_bulk_enable() by a single call to clk_bulk_prepare_enable(). Gr{oetje,eeting}s, Geert
Hi Geert-san, > From: Geert Uytterhoeven, Sent: Wednesday, September 5, 2018 11:00 PM > > Hi Shimoda-san, > > On Fri, Aug 31, 2018 at 12:36 PM Yoshihiro Shimoda > <yoshihiro.shimoda.uh@renesas.com> wrote: > > R-Car Gen3 needs to enable clocks of both host and peripheral. > > Since [eo]hci-platform disables the reset(s) when the drivers are > > removed, renesas_usbhs driver doesn't work correctly. To fix this > > issue, this patch adds multiple clocks management on this > > renesas_usbhs driver. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> > > Thanks for your patch! > > > --- a/drivers/usb/renesas_usbhs/common.c > > +++ b/drivers/usb/renesas_usbhs/common.c > > > @@ -336,11 +337,26 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) > > { > > struct platform_device *pdev = usbhs_priv_to_pdev(priv); > > struct device *dev = usbhs_priv_to_dev(priv); > > + int ret; > > > > if (enable) { > > /* enable PM */ > > pm_runtime_get_sync(dev); > > > > + /* enable clks if exist */ > > + if (priv->num_clks) { > > + ret = clk_bulk_prepare(priv->num_clks, priv->clks); > > + if (!ret) { > > + ret = clk_bulk_enable(priv->num_clks, > > + priv->clks); > > + if (ret) { > > + clk_bulk_unprepare(priv->num_clks, > > + priv->clks); > > + return; > > + } > > + } > > I think you misunderstood my comment: you can replace the calls to > clk_bulk_prepare() and clk_bulk_enable() by a single call to > clk_bulk_prepare_enable(). Oops! I overlooked the clk_bulk_prepare_enable().. I'll submit v3 patch. Best regards, Yoshihiro Shimoda > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 1d355d5..39ed714 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -5,6 +5,7 @@ * Copyright (C) 2011 Renesas Solutions Corp. * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> */ +#include <linux/clk.h> #include <linux/err.h> #include <linux/gpio.h> #include <linux/io.h> @@ -336,11 +337,26 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) { struct platform_device *pdev = usbhs_priv_to_pdev(priv); struct device *dev = usbhs_priv_to_dev(priv); + int ret; if (enable) { /* enable PM */ pm_runtime_get_sync(dev); + /* enable clks if exist */ + if (priv->num_clks) { + ret = clk_bulk_prepare(priv->num_clks, priv->clks); + if (!ret) { + ret = clk_bulk_enable(priv->num_clks, + priv->clks); + if (ret) { + clk_bulk_unprepare(priv->num_clks, + priv->clks); + return; + } + } + } + /* enable platform power */ usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); @@ -353,6 +369,10 @@ static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) /* disable platform power */ usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); + /* disable clks if exist */ + if (priv->num_clks) + clk_bulk_disable_unprepare(priv->num_clks, priv->clks); + /* disable PM */ pm_runtime_put_sync(dev); } @@ -620,6 +640,13 @@ static int usbhs_probe(struct platform_device *pdev) break; } + if (priv->dparam.type == USBHS_TYPE_RCAR_GEN3 || + priv->dparam.type == USBHS_TYPE_RCAR_GEN3_WITH_PLL) { + priv->clks[0].id = "hsusb"; + priv->clks[1].id = "ehci/ohci"; + priv->num_clks = ARRAY_SIZE(priv->clks); + }; + /* set driver callback functions for platform */ dfunc = &info->driver_callback; dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; @@ -667,6 +694,12 @@ static int usbhs_probe(struct platform_device *pdev) if (ret) goto probe_fail_rst; + if (priv->num_clks) { + ret = clk_bulk_get(&pdev->dev, priv->num_clks, priv->clks); + if (ret == -EPROBE_DEFER) + goto probe_fail_clks; + } + /* * deviece reset here because * USB device might be used in boot loader. @@ -720,6 +753,8 @@ static int usbhs_probe(struct platform_device *pdev) return ret; probe_end_mod_exit: + clk_bulk_put(priv->num_clks, priv->clks); +probe_fail_clks: reset_control_assert(priv->rsts); probe_fail_rst: usbhs_mod_remove(priv); diff --git a/drivers/usb/renesas_usbhs/common.h b/drivers/usb/renesas_usbhs/common.h index bce7d35..6e7c5f2 100644 --- a/drivers/usb/renesas_usbhs/common.h +++ b/drivers/usb/renesas_usbhs/common.h @@ -8,6 +8,7 @@ #ifndef RENESAS_USB_DRIVER_H #define RENESAS_USB_DRIVER_H +#include <linux/clk.h> #include <linux/extcon.h> #include <linux/platform_device.h> #include <linux/reset.h> @@ -279,6 +280,8 @@ struct usbhs_priv { struct phy *phy; struct reset_control *rsts; + struct clk_bulk_data clks[2]; + int num_clks; }; /*
R-Car Gen3 needs to enable clocks of both host and peripheral. Since [eo]hci-platform disables the reset(s) when the drivers are removed, renesas_usbhs driver doesn't work correctly. To fix this issue, this patch adds multiple clocks management on this renesas_usbhs driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> --- drivers/usb/renesas_usbhs/common.c | 35 +++++++++++++++++++++++++++++++++++ drivers/usb/renesas_usbhs/common.h | 3 +++ 2 files changed, 38 insertions(+)