diff mbox series

[5/5] usb: renesas_usbhs: add support for R-Car E3

Message ID 1537532792-20376-6-git-send-email-yoshihiro.shimoda.uh@renesas.com (mailing list archive)
State Accepted
Delegated to: Geert Uytterhoeven
Headers show
Series usb: renesas_usbhs: use otg mode and add support for R-Car E3 | expand

Commit Message

Yoshihiro Shimoda Sept. 21, 2018, 12:26 p.m. UTC 
This patch adds support for R-Car E3. This SoC needs to release
the PLL reset by the UGCTRL register like R-Car D3. So, this patch
adds a usbhs_of_match entry for this SoC with
"USBHS_TYPE_RCAR_GEN3_WITH_PLL".

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/usb/renesas_usbhs/common.c | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c
index 522cc09..a3e1290 100644
--- a/drivers/usb/renesas_usbhs/common.c
+++ b/drivers/usb/renesas_usbhs/common.c
@@ -560,6 +560,10 @@  static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev)
 		.data = (void *)USBHS_TYPE_RCAR_GEN3,
 	},
 	{
+		.compatible = "renesas,usbhs-r8a77990",
+		.data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
+	},
+	{
 		.compatible = "renesas,usbhs-r8a77995",
 		.data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL,
 	},