| Message ID | 1544776023-13364-1-git-send-email-fabrizio.castro@bp.renesas.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Geert Uytterhoeven |
| Headers | show |
| Series | usb: renesas_usbhs: add support for RZ/G2E | expand |
Hi Fabrizio, > From: Fabrizio Castro, Sent: Friday, December 14, 2018 5:27 PM > > HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the > one found in R-Car E3 (a.k.a. r8a77990), as it needs to release > the PLL reset by the UGCTRL register like R-Car E3, therefore add > r8a774c0 support in a similar fashion to what was done for the > r8a77990. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Thank you for the patch! Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Best regards, Yoshihiro Shimoda > --- > drivers/usb/renesas_usbhs/common.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c > index 2ff7991..249fbee 100644 > --- a/drivers/usb/renesas_usbhs/common.c > +++ b/drivers/usb/renesas_usbhs/common.c > @@ -540,6 +540,10 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) > */ > static const struct of_device_id usbhs_of_match[] = { > { > + .compatible = "renesas,usbhs-r8a774c0", > + .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, > + }, > + { > .compatible = "renesas,usbhs-r8a7790", > .data = (void *)USBHS_TYPE_RCAR_GEN2, > }, > -- > 2.7.4
On Fri, Dec 14, 2018 at 08:27:03AM +0000, Fabrizio Castro wrote: > HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the > one found in R-Car E3 (a.k.a. r8a77990), as it needs to release > the PLL reset by the UGCTRL register like R-Car E3, therefore add > r8a774c0 support in a similar fashion to what was done for the > r8a77990. > > Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
diff --git a/drivers/usb/renesas_usbhs/common.c b/drivers/usb/renesas_usbhs/common.c index 2ff7991..249fbee 100644 --- a/drivers/usb/renesas_usbhs/common.c +++ b/drivers/usb/renesas_usbhs/common.c @@ -540,6 +540,10 @@ static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) */ static const struct of_device_id usbhs_of_match[] = { { + .compatible = "renesas,usbhs-r8a774c0", + .data = (void *)USBHS_TYPE_RCAR_GEN3_WITH_PLL, + }, + { .compatible = "renesas,usbhs-r8a7790", .data = (void *)USBHS_TYPE_RCAR_GEN2, },
HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> --- drivers/usb/renesas_usbhs/common.c | 4 ++++ 1 file changed, 4 insertions(+)