diff mbox series

[v4,2/2] dt-bindings: spi: Document Renesas R-Car Gen3 RPC controller bindings

Message ID 1545634358-17485-3-git-send-email-masonccyang@mxic.com.tw (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series spi: Add Renesas R-Car Gen3 RPC SPI driver | expand

Commit Message

Mason Yang Dec. 24, 2018, 6:52 a.m. UTC
Document the bindings used by the Renesas R-Car Gen3 RPC controller.

Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
---
 .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt

Comments

Sergei Shtylyov Dec. 24, 2018, 8:14 a.m. UTC | #1
Hello!

On 24.12.2018 9:52, Mason Yang wrote:

> Document the bindings used by the Renesas R-Car Gen3 RPC controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
>   .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 37 ++++++++++++++++++++++
>   1 file changed, 37 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> new file mode 100644
> index 0000000..ba863d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> @@ -0,0 +1,37 @@
> +Renesas R-Car Gen3 RPC controller Device Tree Bindings
> +------------------------------------------------------
> +
> +Required properties:
> +- compatible: should be "renesas,r8a77995-rpc"
> +- #address-cells: should be 1
> +- #size-cells: should be 0
> +- reg: should contain 2 entries, one for the registers and one for the direct
> +       mapping area
> +- reg-names: should contain "regs" and "dirmap"
> +- clock-names: should contain "rpc"
> +- clocks: should contain 1 entries for the module's clock
> +- renesas,rpc-mode: should contain "spi" for rpc spi mode or
> +			   	   "hyperflash" for rpc hyerflash mode.
                                                           ^ p

[...]

MBR, Sergei
Marek Vasut Dec. 26, 2018, 7:07 p.m. UTC | #2
On 12/24/18 7:52 AM, Mason Yang wrote:
> Document the bindings used by the Renesas R-Car Gen3 RPC controller.
> 
> Signed-off-by: Mason Yang <masonccyang@mxic.com.tw>
> ---
>  .../devicetree/bindings/spi/spi-renesas-rpc.txt    | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> 
> diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> new file mode 100644
> index 0000000..ba863d7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
> @@ -0,0 +1,37 @@
> +Renesas R-Car Gen3 RPC controller Device Tree Bindings
> +------------------------------------------------------
> +
> +Required properties:
> +- compatible: should be "renesas,r8a77995-rpc"
> +- #address-cells: should be 1
> +- #size-cells: should be 0
> +- reg: should contain 2 entries, one for the registers and one for the direct
> +       mapping area
> +- reg-names: should contain "regs" and "dirmap"
> +- clock-names: should contain "rpc"
> +- clocks: should contain 1 entries for the module's clock
> +- renesas,rpc-mode: should contain "spi" for rpc spi mode or
> +			   	   "hyperflash" for rpc hyerflash mode.

We do not need special property to identify that the controller is in HF
mode, just attach CFI NOR node or JEDEC SPI NOR underneath it.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
new file mode 100644
index 0000000..ba863d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-renesas-rpc.txt
@@ -0,0 +1,37 @@ 
+Renesas R-Car Gen3 RPC controller Device Tree Bindings
+------------------------------------------------------
+
+Required properties:
+- compatible: should be "renesas,r8a77995-rpc"
+- #address-cells: should be 1
+- #size-cells: should be 0
+- reg: should contain 2 entries, one for the registers and one for the direct
+       mapping area
+- reg-names: should contain "regs" and "dirmap"
+- clock-names: should contain "rpc"
+- clocks: should contain 1 entries for the module's clock
+- renesas,rpc-mode: should contain "spi" for rpc spi mode or
+			   	   "hyperflash" for rpc hyerflash mode.
+
+Example:
+
+	rpc: rpc@ee200000 {
+		compatible = "renesas,r8a77995-rpc";
+		reg = <0 0xee200000 0 0x8100>, <0 0x08000000 0 0x4000000>;
+		reg-names = "regs", "dirmap";
+		clocks = <&cpg CPG_MOD 917>;
+		power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+		resets = <&cpg 917>;
+		clock-names = "rpc";
+		renesas,rpc-mode = "spi";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <40000000>;
+			spi-tx-bus-width = <1>;
+			spi-rx-bus-width = <1>;
+		};
+	};