@@ -4,6 +4,7 @@
*
* Copyright (C) 2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded, Inc.
+ * Copyright (C) 2019 Renesas Electronics Corp.
*/
#include <linux/clk.h>
@@ -15,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/atomic.h>
+#include <linux/sys_soc.h>
#define USBHS_LPSTS 0x02
#define USBHS_UGCTRL 0x80
@@ -35,6 +37,8 @@
#define USBHS_UGCTRL2_USB0SEL 0x00000030
#define USBHS_UGCTRL2_USB0SEL_PCI 0x00000010
#define USBHS_UGCTRL2_USB0SEL_HS_USB 0x00000030
+#define USBHS_UGCTRL2_USB0SEL_USB20 0x00000010
+#define USBHS_UGCTRL2_USB0SEL_HS_USB20 0x00000020
/* USB General status register (UGSTS) */
#define USBHS_UGSTS_LOCK 0x00000100 /* From technical update */
@@ -180,6 +184,60 @@ static int rcar_gen2_phy_power_off(struct phy *p)
return 0;
}
+static int rz_g1c_phy_power_on(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&drv->lock, flags);
+
+ /* Power on USBHS PHY */
+ value = readl(base + USBHS_UGCTRL);
+ value &= ~USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ /* As per the data sheet wait 340 micro sec for power stable */
+ udelay(340);
+
+ if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+ value = readw(base + USBHS_LPSTS);
+ value |= USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+ }
+
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return 0;
+}
+
+static int rz_g1c_phy_power_off(struct phy *p)
+{
+ struct rcar_gen2_phy *phy = phy_get_drvdata(p);
+ struct rcar_gen2_phy_driver *drv = phy->channel->drv;
+ void __iomem *base = drv->base;
+ unsigned long flags;
+ u32 value;
+
+ spin_lock_irqsave(&drv->lock, flags);
+ /* Power off USBHS PHY */
+ if (phy->select_value == USBHS_UGCTRL2_USB0SEL_HS_USB20) {
+ value = readw(base + USBHS_LPSTS);
+ value &= ~USBHS_LPSTS_SUSPM;
+ writew(value, base + USBHS_LPSTS);
+ }
+
+ value = readl(base + USBHS_UGCTRL);
+ value |= USBHS_UGCTRL_PLLRESET;
+ writel(value, base + USBHS_UGCTRL);
+
+ spin_unlock_irqrestore(&drv->lock, flags);
+
+ return 0;
+}
+
static const struct phy_ops rcar_gen2_phy_ops = {
.init = rcar_gen2_phy_init,
.exit = rcar_gen2_phy_exit,
@@ -188,6 +246,14 @@ static const struct phy_ops rcar_gen2_phy_ops = {
.owner = THIS_MODULE,
};
+static const struct phy_ops rz_g1c_phy_ops = {
+ .init = rcar_gen2_phy_init,
+ .exit = rcar_gen2_phy_exit,
+ .power_on = rz_g1c_phy_power_on,
+ .power_off = rz_g1c_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
static const struct of_device_id rcar_gen2_phy_match_table[] = {
{ .compatible = "renesas,usb-phy-r8a7790" },
{ .compatible = "renesas,usb-phy-r8a7791" },
@@ -224,11 +290,20 @@ static const u32 select_mask[] = {
[2] = USBHS_UGCTRL2_USB2SEL,
};
-static const u32 select_value[][PHYS_PER_CHANNEL] = {
+static const u32 pci_select_value[][PHYS_PER_CHANNEL] = {
[0] = { USBHS_UGCTRL2_USB0SEL_PCI, USBHS_UGCTRL2_USB0SEL_HS_USB },
[2] = { USBHS_UGCTRL2_USB2SEL_PCI, USBHS_UGCTRL2_USB2SEL_USB30 },
};
+static const u32 usb20_select_value[][PHYS_PER_CHANNEL] = {
+ { USBHS_UGCTRL2_USB0SEL_USB20, USBHS_UGCTRL2_USB0SEL_HS_USB20 },
+};
+
+static struct soc_device_attribute soc_r8a77470[] = {
+ { .soc_id = "r8a77470" },
+ { /* sentinel */ }
+};
+
static int rcar_gen2_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -238,6 +313,8 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
struct resource *res;
void __iomem *base;
struct clk *clk;
+ const struct phy_ops *gen2_phy_ops = &rcar_gen2_phy_ops;
+ const u32 (*select_value)[PHYS_PER_CHANNEL] = pci_select_value;
int i = 0;
if (!dev->of_node) {
@@ -266,6 +343,11 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
drv->clk = clk;
drv->base = base;
+ if (soc_device_match(soc_r8a77470)) {
+ select_value = usb20_select_value;
+ gen2_phy_ops = &rz_g1c_phy_ops;
+ }
+
drv->num_channels = of_get_child_count(dev->of_node);
drv->channels = devm_kcalloc(dev, drv->num_channels,
sizeof(struct rcar_gen2_channel),
@@ -297,7 +379,7 @@ static int rcar_gen2_phy_probe(struct platform_device *pdev)
phy->select_value = select_value[channel_num][n];
phy->phy = devm_phy_create(dev, NULL,
- &rcar_gen2_phy_ops);
+ gen2_phy_ops);
if (IS_ERR(phy->phy)) {
dev_err(dev, "Failed to create PHY\n");
return PTR_ERR(phy->phy);
This patch adds support for RZ/G1C (r8a77470) SoC. RZ/G1C SoC has a PLL register shared between hsusb0 and hsusb1. Compared to other RZ/G1 and R-Car Gen2/3, USB Host needs to deassert the pll reset. Signed-off-by: Biju Das <biju.das@bp.renesas.com> --- V2-->V3 * No change V1-->V2 * Incorporated shimoda-san's review comment Ref: https://patchwork.kernel.org/patch/10655855/ --- drivers/phy/renesas/phy-rcar-gen2.c | 86 ++++++++++++++++++++++++++++++++++++- 1 file changed, 84 insertions(+), 2 deletions(-)